Tools Needed; Parts; Unpacking And Moving The Range - LG LSEL633CF Owner's Manual

Tools Needed

Phillips Screwdriver
a
Flat-blade Screwdriver
b
1/4" Nut Driver
c
Pliers
d
Tape Measure
e
Level
f
Adjustable Wrench
g
Drill
h
Safety Glasses
i
Gloves
j

Parts

Parts Provided
Template (1)
a
Anti-tip bracket kit (1)
b
Anchor sleeves (4)
c
Lag bolts (4)
d
Parts Not Provided
4-Wire cord or 3-Wire cord (UL approved 40 or
a
50 AMP)
Strain relief (For conduit installations only)
b
NOTE
• Observe all governing codes and ordinances.
• Have the installer show you the location of the
circuit breaker or fuse. Mark it for easy
reference.
• As when using any appliance generating heat,
there are certain safety precautions you should
follow.
• Be sure your range is installed and grounded
properly by a qualified installer or service
technician.

Unpacking and Moving the Range

WARNING
• You should use two or more people to move and
install the range. (Excessive Weight Hazard)
Failure to do so can result in back or other injury.
• Do not use the door handles or knobs to push or
pull the range during installation or when
moving the range out for cleaning or service.
Doing so can result in serious damage to the
range.
• Do not push or pull the range by grabbing the
open oven door or cooktop only. Doing so can
result in serious damage to the range.
INSTALLATION 11