Table of Contents
Advertisement
Before first Use
Remove the electric kettle from the packaging and check it for any damage in
transit. Dispose of any non-reusable packaging material properly or store it in a
safe location out of reach of children.
Setup and Operation of the Kettle
1. Place the base securely on a flat and horizontal surface. Connect the base to
a properly installed protective contact socket.
2. Open the lid by pressing the release button (1). Fill the kettle with water. Be
careful not to overfill the kettle. Only fill up to the MAX mark on the water
level indicator.
3. Place the kettle on the base and close the lid.
4. To boil the water, press the power button (2). The kettle turns on and brings
the water to a boil. The heating of the water is indicated by the colour
changes on page 3.
If you want to heat the water to one of the preselectable temperatures 40 °,
70 °, 80 ° or 90 °, press the ± key (3) until the LED above the desired
temperature lights up and then press the power button (2). The heating of
the water is indicated by a colour change in the illumination.
Make sure the lid stays closed during use.
Before using it for the first time, boil the kettle twice with fresh water. Use
only clear water without additives.
The appliance switches off automatically after the cooking process. If you
would like to end the cooking process early, press the power button (2) or
simply remove the kettle from the base. Watch out for hot water! There is a
risk of scalding!
5. Always unplug the kettle if you are not going to use the kettle for a long
period of time, if you want to clean it, move it, or if any faults occur.
Operation
10
Advertisement
Table of Contents
