Download Print this page

Atlas Copco 4250327580 Instruction Supplement

Reinforcements foot

Printed Matter No.9839 2169 00

Publication Date 2021-06-28

Valid from Serial No. -

Reinforcements Foot

Read all safety warnings and instructions

Failure to follow the safety warnings and instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

Reinforcements Foot

4250327580

WARNING

Instruction Supplement

Table of Contents

Need help?

Do you have a question about the 4250327580 and is the answer not in the manual?

Page 1 Printed Matter No.9839 2169 00 Publication Date 2021-06-28 Valid from Serial No. - Instruction Supplement Reinforcements Foot 4250327580 WARNING Read all safety warnings and instructions Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.
Page 2 Table of Contents Instruction Supplement ................... 3 © Atlas Copco Industrial Technique AB - 9839 2169 00...
Page 3 Tighten the new screws with the washers to attach the left half of the reinforce- ments foot to the left handle cover of the tool (0.7 Nm). The M3x20 screws and the washers needed for this procedure are provided with the acces- sory kit. © Atlas Copco Industrial Technique AB - 9839 2169 00...
Page 8 Original instructions © Copyright 2021, Atlas Copco Industrial Technique AB. All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. Atlas Copco Industrial This applies in particular to trademarks, model denominations, part numbers Technique AB and drawings.