Rush Creek Creations 37-0045 Assembly Instuctions

Rush Creek Creations 37-0045 Assembly Instuctions

8-gun cabinet with storage

Advertisement

Quick Links

Item # 37-0045
8-GUN CABINET WITH STORAGE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 37-0045 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rush Creek Creations 37-0045

  • Page 1 Item # 37-0045 8-GUN CABINET WITH STORAGE...
  • Page 2 Tools Needed For Assembly: Screwdriver Drill Assembly Tips: If you are using an electric screwdriver for assembly, set it at low torque and do not over-tighten the hardware. Care: Apply lemon oil with a soft cotton cloth. Do not use products with silicone; these may cause damage to the finish. Do not allow the wood to come in contact with any type of paint remover.
  • Page 3 Parts List Side panel for Bottom panel Butt plates panel Side panel bottom cabinet Barrel rest Back panel Front door panel Top panel Flat head screw Door knob Front panel Bolt for bottom cabinet Back panel Flat support Flat head head screw screw...
  • Page 4 Step 1: Unpack the carton on a smooth surface. Check carefully to ensure that all parts are included. Attach the side panels (#1) to the butt plate panel (#3) using bolts (#10). Connect the bottom cabinet side panel (#2) to the bottom of the butt plate panel (#3). Attach the assembled piece to the bottom panel (#4) with bolts (#10).
  • Page 5 Step 3: Place the top panel (#7) on top of the side panel; tighten bolts (#10) into the holes on the top panel. Step 4: At least two people are needed to carefully lift the cabinet to an upright position. Use flat head screws (#15) to mount the back panel support (#13) to the back panel.
  • Page 6 Step 5: Install the front door panel (#8) to the cabinet; tighten bolts (#10) into the holes on the door panel. Attach the panel (#9) to the bottom cabinet. Use flat head screws (#16) to screw the door knob (#11) to the door. Use flat head screws (#17) with anchors (#18) to secure the cabinet to the wall.
  • Page 7 Step 6: The gun cabinet is fully assembled.
  • Page 8 Be sure to check out all the exciting products has to offer. Visit our web site at: www.rushcreeklogfurniture.com Warranty: All of our products come with a one year warranty on all parts. Manufacturer Defects: Defective parts will be replaced at no cost to you. Please send an e-mail to cs@rushcreeklogfurniture.com including photos of the de- fective part(s) and we will send replacements.

Table of Contents