Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Easy EASYceiling Direct
Summary of Contents for Easy EASYceiling Direct
- Page 1 EASYceiling Direct Installation manual...
- Page 2 EASYceiling Direct is installed by gluing the panel to the ceiling. EASYceiling Direct consists of 40 mm glass wool that is coated on the visible sides. The panels are classified as non-flammable according to EN ISO 1182. There are two versions: With a facet edge or with a straight edge.
- Page 3 Necessities Tape measure Work gloves Ladder / scaffolding Caulking gun Pencil/pen Stanley knife optional Cross line laser optional Components High Tack adhesive 1,4m2 panel...
- Page 4 Method Measure the ceiling and the EASYceiling Direct. Draw the desired location on the ceiling. If necessary, cut the EASYceiling Direct to size with a Stanley knife. 60x60cm 60x120cm 120x120cm...
- Page 5 Apply strips of the adhesive to the panel as shown in the illustration, 10 cm from the edge. When using the mounting kit, it is important that the V-groove of the nozzle faces up. Please note! Also leave space between the strips of adhesive.
- Page 6 Place the panel against the ceiling at the desired location, minor corrections can be made. Press the panel firmly in place for 10 seconds. Tip: Use a cross line laser for positioning and aligning the ceiling panels.
- Page 7 #weareacoustics This text has been compiled with the utmost care. The same applies to the test results and further certificates. Howe- ver, no rights may be derived from this text and modifications are subject to change. It is not possible to guarantee certain properties or the suitability of our products for a specific application.
Need help?
Do you have a question about the EASYceiling Direct and is the answer not in the manual?
Questions and answers