Advertisement
Quick Links
SSW7-USB
USB Adapter for MPI Bus
700-755-1VK21
User Manual
Version: 2 / 2005-02-03
Order number of manual: 900-755-1VK21/en
Systeme Helmholz GmbH
Hannberger Weg 2
D-91091 Großenseebach
Phone: +49 9135 7380-0
Fax: +49 9135 7380-110
E-Mail: info@helmholz.de
Internet:
www.helmholz.de
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Helmholz SSW7-USB
Summary of Contents for Helmholz SSW7-USB
- Page 1 SSW7-USB USB Adapter for MPI Bus 700-755-1VK21 User Manual Version: 2 / 2005-02-03 Order number of manual: 900-755-1VK21/en Systeme Helmholz GmbH Hannberger Weg 2 D-91091 Großenseebach Phone: +49 9135 7380-0 Fax: +49 9135 7380-110 E-Mail: info@helmholz.de Internet: www.helmholz.de...
- Page 3 (photocopy, microfilm, or other method) without the express written permission of Systeme Helmholz GmbH, not even for use as training material, or using electronic systems. All rights reserved in the case of a patent grant or registration of a utility model or design.
- Page 4 CPU socket of the programmable controller or at any other point in the MPI network. The housing of the SSW7-USB contains a type "B" USB socket. The SSW7-USB can be connected to the PC via the standard USB cable. The SSW7-USB is powered from the USB bus.
- Page 5 Installation in Windows 2000/XP To install the SSW7-USB driver, connect the device to your PC via a USB cable. The SSW7-USB is automatically detected by the operating system. Answer the question, if you want to connect to the windows update website with the option “…...
- Page 6 Then confirm in the following dialog box: The driver is now installed and the SSW7-USB can be used. This operation is only necessary the first time you use the SSW7-USB on a PC. The driver will be activated automatically when you subsequently use the SSW7-USB.
- Page 7 "Control Panel / System / Device Manager", which you can now use in your PLC programming software. If you plug the SSW7-USB into another USB interface, the SSW7-USB may appear on another COM interface. If the operating system does not request a driver the first time you plug in the SSW7- USB, you may already have an older or similar driver installed on your system.
- Page 8 Parameterization The SSW7-USB settings are defined in the software used for communication with the programmable controller. This might be programming software, or the parameterization software of an operator panel, or the parameterization of a display. No special parameterization tool for the SSW7-USB is required because the parameterization of the adapter is automatically transmitted to the adapter every time the software is used.
- Page 9 SSW7 parameterization software With the "SSW7 Tool V3", it is possible to preparameterize or update an SSW7-USB with any computer, even if there is no parameterization software or Step 7 software installed on that computer. The "SSW7 Tool V3" can be downloaded from our download area at www.helmholz.de.
- Page 10 Technical data Order number SSW7-USB 700-755-1VK21 Dimensions 105 x 53 x 29 mm (LxWxH) Weight approx. 180g (incl. MPI cable & connector) MPI interface Type: RS485 Transmission rate: 19.2 kbps or 187.5 kbps Cable: 1.2m Connection: Connector, SUB D 9-way...
-
Page 11: Pin Assignment
Pin assignment SUBD connector MPI n.c. M24V DATA.B RTS AS 0V (M5V) n.c. +24V DATA.A RTS PG Cable MPI extension cable (700-751-6VKx1): SSW7-USB Page: 11...
Need help?
Do you have a question about the SSW7-USB and is the answer not in the manual?
Questions and answers