pTron Bassbuds Jade Product Manual

Bassbuds Jade TWS Earbuds - Product Manual
Important: pTron 'Bassbuds Jade' is set at 50% default volume, and the earbuds does not support volume
adjustment. Please control the volume via the connected phone.
Touch Sensitive Area
(TSA)
Smart Power On & Pairing
1. Open the charging case lid, earbuds will Switch On automatically.
2. Wait for 2-3 seconds until L & R earbuds pair to each other.
3. Turn on the Bluetooth on your phone & search "pTron TWS" to connect with the device.

Smart Power Off

Touch TSA on both the earbuds for 5 seconds Or Keep both the earbuds into the charging case and close it
properly.
Note: TSA stands for Touch Sensitive Area.

Mode Change

Old Version: Touch TSA 4 time on either earbud to change the modes - Game and music.
New Version: Touch TSA on Right earbud for 1-2 seconds.
Note: Earbuds will be in music mode by default.

Connectivity Bluetooth - Automatic

Just open the charging case, earbuds will Switch On. They will automatically connect to the last connected device
(Instant wake & pair technology).
Note: The last connected device must be in 10 meters wireless range and Bluetooth function must be On.
Calling or Music through Mono & Dual Buds
Mono Bud Use - Just place the right or left earbud back into the charging case and close it properly.
Dual Buds Use - Use left & right earbuds together.

Voice Assistant Activation

Touch TSA on Left earbud for 2-3 seconds, 'didi' sound indicates that voice assistant is activated.
Touch Sensitive Area
(TSA)