Nexotek NT-P600S Quick Start Manual

NT-P600S Quick Start Guide
Knowing Your Easy Phone
Key functions
Scroll
1. Select a Skype contact from your
contact list
2. Select an entry from your call history
3. Adjust the phone's speaker volume
while talking
Skype tabs
Switches between the tabs of your Skype
window on the computer screen
Dial
1. Places a call or answers an incoming
call
2. Used for the hold and call waiting
functions
Numeral pad
Set up your Easy Phone in
three quick steps!
1.
Install the Skype software
2.
Install the SkyMagic
software
3.
Connect the phone to your
PC
RING
Select your desired ring tone
Clear
Clears wrong numbers you may have
entered when dialing a call
End
Ends a call or refuses an incoming call
MUTE
Used to mute and un-mute a call while
talking
STEP 1
Install the Skype Software
Make sure that your computer is connected to the
Internet before starting installation.
1. Insert the SkyMagic CD into your CD-ROM drive.
2. In the SkyMagic window, click Install Skype
Software to open the Skype Web page,
www.skype.com.
3. Download the Skype software from the Web site.
4. Follow the on-screen instructions to install the Skype
software on your computer.
Create a New Skype Account
If you already have a Skype account, sign in and
proceed to Step 2.
1. Run Skype and click on Don't have a Skype Name?
to open the Create Account window.
2. Choose your Skype name and password. Enter the
required information (denoted by a red asterisk) and
click Sign In.
Make a Skype Test Call
You must have a microphone and speaker
connected to computer to make the test call.
1. Select Skype Test Call in the Contacts tab. Click the
green call button.
2. Follow the voice instructions to test Skype.
STEP 2
Install the SkyMagic Software
1. Insert SkyMagic CD into the CD-ROM drive.
2. On the SkyMagic screen, Click on Install SkyMagic
software.
3. Follow the on-screen instructions to install the Skype
software on your computer.
4. When the following screen comes up, select Allow
this program to use Skype and click OK.