Bergstrom K702 Instruction Manual

Projector Alarm Clock and Weather Station
K702
v001: 08/04/22
Please read and retain these instructions for future reference
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Power connection:
Insert the USB receiver into the energizing port and plug
the other end into the power port.
This product is suitable for general USB interface line, which
can be connected to mobile power supply, computer,
ordinary and vehicle-mounted power supply, etc.
Battery backup (requires 2 AAA batteries. Not included) can
keep the time settings when there is an unexpected
blackout. Note: the clock will not stay lit and no adjustment
can be made when the unit is only powered by batteries.
Operation:
Press MODE one time to the view calendar.
Press MODE one more time to view the alarm time.
Setting the time:
Press and hold MODE for 3 seconds to enter the time setting
mode.
The hour digits are blinking and can be set by pressing UP or
DOWN for setting the hour.
Press MODE again:
The minute digits are blinking and can be set by pressing UP or DOWN for setting the minutes.
Dimensions
(H) 11 x (W) 15 x (D) 6.2cm
Length of USB lead: 1m
Batteries required: 2x AAA (not included)
•
TIME, CALENDER & ALARM
•
TEMPERATURE & HUMIDITY
•
TIME PROJECTION
•
HUMIDITY TREND
•
SNOOZE & BACKLIGHT
•
MAX & MIN TEMPERATURE & HUMIDITY RECORDS
•
FITS RIGHT IN ON YOUR NIGHTSTAND TO PROJECT TIME
AND TEMPERATURE ONTO THE CEILING OR WALL.
•
COLOUR SCREEN
•
TIME: 12 OR 24HR CLOCK
•
POWER: USB OR 2* AAA BATTERY (NOT INCLUDED)
• USB CORD INCLUDED – USB RECHARGABLE
•
PROJECTOR CAN ROTATE 90°
Battery compartment
Controls on the back