Sony SAL1855 Service Manual page 37

4-6. FINISHED INSPECTION (ActuatorCheckerSAM)
Equipment (Only the specific equipment is listed.)
• Adhesive Bond (B-10)
4-6-1. Preparations
1. Attach the checking lens to the equipment. (Refer to LENS GENERAL ADJUSTMENT GUIDE Section 1-2-2.)
2. Start up the lens adjustment program (ActuatorCheckerSAM).
Click [Set up] and perform the initial setting. (Refer to LENS GENERAL ADJUSTMENT GUIDE Section 1-3.)
3.
4-6-2. Finished Inspection Item
1. Adjustment/Inspection Method
Click [Start "Ent'].
1)
2) Operate as instructed in the menu.
2. Inspection Item
1) AF/MF Switch
2) LVDD1 Consumption Current
3) Focus Pattern
4) Zoom Pattern
5) Adjust PI
6) Focus Pattern(Motor)
7) Stopping Accuracy
8) Write SB
9) Search Zoom Adj
10) Search Focus Adj
Note:
This two items are not adjusted automatically in case of
starting Adjustment/Inspection with clicking [Start "Ent'].
SAL1855 (DT 3.5-5.6/18-55 SAM) (DT 18-55mm F3.5-5.6 SAM)
4-1-2. Adjustment Flow Chart
4-10
Fig.4-6-1