VORAGO Earphones Bluetooth 601 EPB-601 Manual

VORAGO Earphones Bluetooth 601 EPB-601 Manual

Advertisement

VORAGO Earphones Bluetooth 601 EPB-601 Manual

PRECAUTIONS AND WARNINGS

  • Adjust the sound volume of your headphones to an appropriate volume. Prolonged and continuous exposure to excessive loud sound can damage the hearing system irreversibly.
  • For your safety, never use headphones while riding bicycles, motorcycles, or automobiles; since they make it difficult for you to hear external sounds, increasing the risk of having an accident.
  • Avoid spilling liquids on your device, they can cause it to malfunction.
  • Using this device under conditions other than normal may cause electric shock.

KNOW YOUR DEVICE

Overview

1 Volume +
2 Multifunction button
3 Loading Port
4 Volume-
5 Silicone pads
6 Magnetic Assembly

INSTRUCTIONS

Before you start using the headset, you must fully charge it and connect the headset with a compatible phone or device.

Battery charge

This device has a built-in internal rechargeable battery. Do not try to remove the battery from the device, as it may damage the device.

  • The handset will emit an intermittent beep and red indicator flash when the battery is low and requires recharging.
  • Connect the device's charging cable to the USB port of your computer.
  • Connect the other end of the USB cable to your headphones. The red indicator light turns on indicating that the device is charging.
  • The indicator light turns off when the handset is properly charged (approximately 1-2 hours).

Bluetooth connection

To turn on the device, press the central buttons of both headphones (4) for 3 seconds, do not release the key until the blue light turns on and / or red and blue lights flash; this indicates that the headset is in pairing mode. Now you can use your mobile phone to connect to the headphones. You will find the device by the name of EPB-601 when I looked for your headphones to pair.

To make a new connection with a new bluetooth music player it is necessary to have the headphones on and press the buttons (4) of each for 3 seconds or until you hear "pairing". Now you can use your mobile phone to connect to the headphones. You will find the device by the name of EPB-601 when I looked for your headphones to pair.

Connection

  • Consult the user manual of your device to activate Bluetooth and put it in detection mode. If the device asks for a password Enter 0000. The blue LED on the headset will light twice every 5 seconds, this will indicate that it is connected and working.

Device shortcuts

The device has shortcuts to pause your music or answer and hang up calls in progress without using your cell phone.

Pause music / play Short touch to multi-function button (1)

Answer call Short touch to left multifunction button (1)

Hang up call Short touch to left multifunction button (1)

TROUBLESHOOTING

  • Device does not turn on

Verify it is charged

  • The device turns on but no sound comes out

Verify that it is correctly paired with the sound source via Bluetooth.

  • The device turns on and is paired but cannot be heard

Check that the sound volume is up

  • Only one earphone listens and the other does not

Verify that the 2 devices are connected to your device. Turn off the 2 devices and turn them on by pressing and holding the multifunction buttons (1) for 8 seconds at the same time until they flash red and blue. Follow the previous instructions of Bluetooth Connection.

TECHNICAL SPECIFICATIONS

Frequency range 20 Hz - 20 kHz
Sensitivity 96 ± 3dB
Frequency range (mic) 100 Hz - 10 kHz
Sensitivity (mic) - 42 dB ± 2 dB
Impedance 32 Ω
connector BT, USB
Range / BT Wireless 10m
Speaker diameter 11.2 mm
Battery Li-Polymer (3.7 V 100 mAh)
Weight 40 g
Compatibility BT 4.1

Limited product warranty

Vorago equipment and / or accessories are covered by a limited warranty for the time indicated in the annexed validity table, counting from the date of acquisition, against any manufacturing and operation defect, provided they have been used under normal conditions of use during the warranty period and for which it was manufactured. Vorago guarantees the buyer the absence of anomalies regarding the materials.

Products Validity
PC, tablets, cell phones, audio, keyboards, mouse, networks and accessories 12 Months

LCD Monitor

*Except in panel (screen display) for which it will only be 12 months.

36 Months*

How to obtain warranty support
Guarantee claims are processed through the point of sale, during the first 15 days after the purchase, as long as they meet the requirements. Guarantee claims that can not be processed through the point of sale and any concerns related to the product purchased should be sent with the prepaid guide by Vorago to the address of the Vorago headquarters in Francisco Villa No. 3, Col. San Agustín, CP 45645, Tlajomulco de Zúñiga, Jalisco, Mexico.

To validate a guarantee, the following information must be sent to the email: garantias@voragolive.com

  1. Model and color
  2. Product failure
  3. Ticket or purchase invoice (digitized)
  4. Your address with CP, telephone and full Name.

Available in the establishment where the product was purchased and / or in our central offices:

Vorago, S.A. de C.V.Importador:

Francisco Villa No. 3Vorago, S.A. de C.V.

Col. San Agustín, C.P. 45645Francisco Villa No. 3

Tlajomulco de Zúñiga, Jalisco, México. Col. San Agustín, C.P. 45645 Tel. (33) 3044 6666Tlajomulco de Zúñiga, Jalisco, México.

Tel. (33) 3044 6666

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download VORAGO Earphones Bluetooth 601 EPB-601 Manual

Advertisement

Need help?

Need help?

Do you have a question about the EPB-601 and is the answer not in the manual?

Questions and answers

Table of Contents