Advertisement
3
Timing Chart
SW1
ON
OFF
AC Power
RUN
2.3.4
SW
BRAKE
Motor
Operation
Notice
If you use BRAKE/STOP function, please keep the using frequency
at
above 4 seconds. (run for 2 seconds and stop for 2
using frequency is too high, temperature of the Motor will become
too high. And so making the internal temperature switch and stopping
running. Please consider ventilation and compulsory heat
countermeasures to keep the Motor surface temperature maintained
below 90°C.
The BRAKE/STOP function is electronic brake. While braking after
0.5 seconds, the Motor will have no holding torque. Please use with
TROY's Electromagnetic Brake Motor series to brake stop and hold
the Motor position for a long time.
Please inquiry with local office or distributor to choose product
RUN/BRAKE STOP
SW2,SW3,SW4
SW2,SW3,SW4
the Motor will stop immediately. After Brake for about 0.5 seconds,
the brake current will flow through it. At this time the Motor will have
no holding torque.
RUN
RUN
Important
As soon as switching to "RUN",
the Motor will run immediately
As soon as switching to "BRAKE",
STOP
BRAKE
RUN
RUN
STOP
BRAKE
seconds)If the
3
Advertisement
