QNect QN-WB02- Wi-Fi Smart Led Bulb Manual

Table of Contents

Specifications

Download and install the app "qnect home" from Apple App Store or Google Play Store on your mobile device.

Launch the app "qnect home".
Create a new account or log in to your existing account.
Create a location.
Tap "+" to add the device.
Select Lighting > QN-WB02 from the list of products.
Screw in the smart LED bulb.
Switch on the power.
- If the light does not flash: Switch the power to the smart LED bulb on - off - on - off - on.
- If the light flashes: Confirm in the app.
Confrm the Wi-Fi network and password.
Enter the device name.

Note: The device name will also be used by Amazon Alexa and Google Home.

To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
Disconnect the product from the mains and other equipment if a problem should occur.
Read the manual carefully before use. Keep the manual for future reference.
Only use the device for its intended purposes.
Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
The device is suitable for indoor use only. Do not use the device outdoors.
Do not expose the product to water or moisture. Do not touch the device with wet hands.
Make sure that the voltage of the smart LED bulb is compatible with the mains electricity of your country before connecting it to the bulb holder.
Make sure that the base of the smart LED bulb matches the bulb holder.

Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Clean the outside of the device using a soft, damp cloth.

Do you have a question about the QN-WB02 that isn't answered in the manual? Leave your question here.

Thank you! Your question has been received!

Save Article as PDF