QNect QN-WB01 - Wi-Fi Smart Led Bulb Manual
Specifications
Input voltage 220 - 240 VAC
Lamp shape A60
Base E27 Wattage 9 W
Rated luminous flux 806 lm
Colour temperature RGB + 2700 K
Rated Life time of Lamp 25000 h
Frequency range 2400 - 2482.5 MHz
Energy consumption per 1000h 10kWh
Energy Class A+
Antenna gain: 3dBi
Max. radio transmit power 20 dBm
Dimensions: 60mm x 110mm
Use
- Download and install the app "qnect home" from Apple App Store or Google Play Store on your mobile device.
- Launch the app "qnect home".
- Create a new account or log in to your existing account.
- Create a location.
- Tap "+" to add the device.
- Select Lighting > QN-WB01 from the list of products.
- Screw in the smart LED bulb.
- Switch on the power.
- If the light does not flash: Switch the power to the smart LED bulb on - off - on - off - on.
- If the light flashes: Confirm in the app.
- Confrm the Wi-Fi network and password.
- Enter the device name.
Note: The device name will also be used by Amazon Alexa and Google Home.
Safety
- To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
- Disconnect the product from the mains and other equipment if a problem should occur.
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the device for its intended purposes.
- Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.
- The device is suitable for indoor use only. Do not use the device outdoors.
- Do not expose the product to water or moisture. Do not touch the device with wet hands.
- Make sure that the voltage of the smart LED bulb is compatible with the mains electricity of your country before connecting it to the bulb holder.
- Make sure that the base of the smart LED bulb matches the bulb holder.
- Do not use cleaning solvents or abrasives.
- Do not clean the inside of the device.
- Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
- Clean the outside of the device using a soft, damp cloth.
Support
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download QNect QN-WB01 - Wi-Fi Smart Led Bulb Manual
Need Assistance?
Do you have a question about the QN-WB01 that isn't answered in the manual? Leave your question here.