Advertisement
Quick Links
front runner
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
RRAC223_REV_A01
Dometic Perfectwall
Awning Mounting Brackets
READ ME !
Thank you for purchasing a Dometic Perfectwall Awning Mounting Brackets.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
1
RRAC223
© 2022 FRONT RUNNER VEHICLE OUTFITTERS
ENG
Advertisement
Related Manuals for Dometic Perfectwall
Summary of Contents for Dometic Perfectwall
- Page 1 RRAC223 READ ME ! Thank you for purchasing a Dometic Perfectwall Awning Mounting Brackets. Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components. Refer to Page 2 for a list of all the components, quantities and tools required.
- Page 2 CHECK ONLINE FOR THE LATEST FITMENT GUIDE WWW.FRONTRUNNEROUTFITTERS.COM GET ORGANIZED IN THE BOX Awning Mount Support Bracket (Van Rack Standard Slat) Support Bracket (Van Rack Inverted Slat) Support Bracket (Slimline II Rack) M8 Nut Cap TOOLS NEEDED M6 x 16 Button Head Bolt M6 x 20 Carriage Bolt M6 x 16 Counter Sink Bolt 10mm...
- Page 3 FIT AND SECURE Decide which side of the rack the awning with the two outer onces positioned over the closest slats and the third positioned centrally over the closest slat. Remove the end caps to insert hardware needed and loosen the two brackets of all the slats on the chosen side.
- Page 4 Bolts, M6 Flat Washers & M6 Nyloc Nuts (Items 7, 8, 12 & 13) for assistance. 10mm Depending on the length of your Dometic awning, you may need either a narrow adapter (shown in 2.6) or a wide adarpter mounted to the middle Awning Mount Bracket.
- Page 5 FIT AND SECURE With the help of a friend, hook the awning onto the adaptor as shown in 2.7 & 2.8. Using a 3mm drill bit, drill through the pre-drilled holes in the adaptor into and © 2022 FRONT RUNNER VEHICLE OUTFITTERS RRAC223_REV _A01...
- Page 6 FIT AND SECURE 2.10 Use the self tapping screws supplied with the awning to secure the awning to the adapters as shown. end-caps. FINISH Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online.