Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Iddero HC -KNX Series
Summary of Contents for Iddero HC -KNX Series
- Page 1 IDDERO HCx-KNX TOUCH PANELS User Guide www.iddero.com 130122-02...
-
Page 2: Table Of Contents
Communication Objects ...................... 39 Address Tree ........................40 © 2013 All Rights reserved. Iddero is a registered trademark of INGELABS, S.L. All other registered trademarks and trade names used in this document are the property of their respective owners. Other product and/or company names used in this document may be protected by copyrights, trademarks, or patents. -
Page 3: Introduction
INTRODUCTION Iddero touch panels are advanced systems that let users monitor and control home and building automation installations based on KNX technology. Besides allowing for local monitoring and control from the touch panel itself, Iddero touch panels feature an integrated web server for access to the system from a smart phone, tablet, PC, or any other device equipped with a standard web browser. -
Page 4: Basic Operation
Basic Operation Touch Panel Operation The user interface of Iddero touch panels is designed to be conveniently operated without the need of external devices such as a stylus. Simply touch with your finger on the graphical representation of buttons, icons, or any other element you want to activate. -
Page 5: Install Mode
The touch panel will beep three times to acknowledge the request and will enter install mode (the unit also enters install mode automatically the first time it boots, or when no valid project data is found.) www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... - Page 6 The current IP address and subnet mask of the touch panel are shown on the installation screen. Please refer to your operating system’s documentation for detailed help on configuring the network settings on your PC. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
-
Page 7: User Interface
USER INTERFACE General Navigation Structure Iddero touch panels’ user interface is organized into “pages”. The following figure shows the general navigation structure graphically. Inactivity Zone navigation navigation time Boot Zone selection Home page (maps or zone Control pages list) Inactivity... -
Page 8: Control
Map definition is entirely optional. If maps have not been defined in the project configuration, the system will just display a list of zones, allowing the user to select zones by name. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... - Page 9 The number of devices that can be displayed on a control page depends on the layout that was configured for that page. The following figure shows the available layouts. There are eight generic layouts, plus one specific layout for HVAC control pages. HVAC www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
- Page 10 • • • DPT 12.x 4-bit unsigned value • • • • DPT 13.x 4-bit unsigned value • • • • DPT 14.x 4-bit unsigned value • • • DPT 16.x String www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
- Page 11 A/C unit, fan speed, and vane movement. Split controller (Intesis): Designed for integration with IntesisBox gateways from Intesis. Supports control of the temperature setpoint, operation mode of the A/C unit, fan speed, and vane movement. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
-
Page 12: Predefined
(start / end times and actions, and days of the week and date ranges where the actions should be run). See Chapter 4 for a detailed functional description of time schedules. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... -
Page 13: Security
If the touch panel is in use when an incoming call is received, it will not switch to the video door phone page automatically, in order to avoid interrupting the user’s operation. The user can then navigate to the video door phone page manually. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... - Page 14 Audio volume: Audio volume once the call is accepted Microphone level: Gain of the touch panel’s built-in microphone The “Default” button in this dialog box restores all parameters to their reference values (factory-set defaults). www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
- Page 15 The door opening buttons always relate to the door station currently selected. They may or may not be shown depending on the configuration of the selected door station. Audio settings are global and affect communications with all door stations. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
-
Page 16: Ip Camera Monitoring
Select any of the available cameras to get a live preview of the video captured by the camera. Touch the preview image to switch to full screen mode. Once in full screen mode, touch anywhere on the screen to go back to the cameras page. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... -
Page 17: User Preferences And Settings
(depending on configuration). Both beeps can be disabled here. Audio settings: Allows configuration of audio parameters for the video door phone function (the same settings can also be adjusted from the video door phone page). www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... - Page 18 The e-mail notification function requires valid network settings, including a valid DNS server. If e-mail notifications are not being sent, please check the network settings of the touch panel (Settings → System → Network). www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
-
Page 19: Access Control
PIN code corresponding to level 1. If level 2 is specified for a page, users can access it by entering the PIN code for either level 1 or level 2, and so on. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... -
Page 20: System Inactivity And Power Saving Mode
(such as timers, alarm monitoring, etc.) remain operational. Touch the screen to exit power saving mode. The system also exits power saving mode automatically upon reception of an incoming call from the video door phone. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... -
Page 21: Functional Description
Scene activation, as in the previous case, can be manual or by telegram. If you reactivate a scene that is already running, execution is restarted from the beginning. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... -
Page 22: Time Schedules
The following parameters can be set by the user for each time program: Start time and end time Start action and end action Week days (SMTWTFS) when the program is valid Optionally, a date range (day / month) when the program is valid www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... -
Page 23: Alarms
If any of the configured alarms is triggered, the system enters the alarm state and performs the following actions: 1. The LED status indicator on the front panel turns red 2. A warning beep sounds (depending on configuration) www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... - Page 24 If an alarm is active and the user acknowledges it, it switches to “Waiting for sensor deactivation” state (or directly to “Inactive” if no explicit deactivation of the alarm condition is required). www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
-
Page 25: Presence Simulation
The event interval can also be configured by the user. This parameter defines time elapsed between two consecutive events during presence simulation. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... -
Page 26: Logic Functions
The output is active if any input is active The output is active if an odd number of inputs is active NAND Equivalent to NOT + AND Equivalent to NOT + OR XNOR Equivalent to NOT + XOR www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... - Page 27 The following logic tables show the output values generated from input values for logic gates with one, two, three or four inputs (In = Input “n”). Single-input gates: Identity Two-input gates: NAND XNOR Three-input gates: NAND XNOR Four-input gates: NAND XNOR www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
- Page 28 The delay unit can be configured to discard any telegrams received while the delay unit is busy www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
- Page 29 This parameter is designed to avoid quick changes in the comparator output when both inputs take very similar values: www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
-
Page 30: Video Door Phone Function
Chapter 3, User Interface provides detailed information about video door phone monitoring on Iddero touch panels. IP Cameras Iddero HC2-KNX and HC2L-KNX touch panels enable real time monitoring of IP cameras in the home or building. Available IP cameras can be defined during at project configuration time. Predefined camera models can be added by simply selecting the manufacturer and part number. -
Page 31: Gsm Module
KNX bus by means of SMS messages or missed calls. The DW-GSM expansion module is sold separately and is compatible with all Iddero touch panels. For more information about configuring and using the DW-GSM module, please refer to the instruction manual available in the download area of the Iddero website. -
Page 32: Date And Time
4.11 Date and Time Iddero touch panels feature an integrated real time clock (RTC). The real time clock is used to display the current date and time, as well as to control time schedules and the presence simulation function. -
Page 33: Web Access
4.12 Web Access Iddero touch panels feature an integrated web server for access to the system from a smart phone, tablet, PC, or any other device equipped with a standard web browser. The main features of the integrated web server for Iddero touch panels are as follows: Automatic generation of web-based visualization from project data. - Page 34 When users try to access a page with restricted access (access levels 1 to 4), the system will prompt for a PIN access code indicating the minimum access level required (e.g. “Level 1”) www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...
- Page 35 IDDERO HCx-KNX TOUCH PANELS – User Guide...
-
Page 36: Configuration Software
CONFIGURATION SOFTWARE Introduction Iddero touch panels are configured and commissioned through Iddero’s configuration software, which can be downloaded free of charge from the Iddero website (www.iddero.com). The configuration software works with projects. A project describes the logical structure of a home or building automation installation, the navigation between the different available functions, and the detailed parameters of system operation. -
Page 37: Menus
IP address of the touch panel (shown on screen at startup in install mode), as well as the installer user name and password, whose default values are as follows: Option Default Value Installer user name instalador Installer password knxinstall www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... - Page 38 The “Update firmware...” command updates the touch panel firmware. In order to do this, you need to select a valid firmware update file. Use only firmware updates released by Iddero. Again, it is critical not to interrupt the operation or turn off the touch panel during the update process, as if you interrupt the firmware update process, the touch panel may be left in a locked state and may need to be returned to factory for repair.
-
Page 39: Project Tree
Most of the time, there will be no need to modify the default configuration. Please refer to the KNX standard documentation for additional information about the meaning and operation of each flag. Addresses: Group addresses currently linked with the communication object. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide... -
Page 40: Address Tree
The existing links will be displayed in the parameter area. Right-click on the link you want to delete and select “Delete” from the pop-up menu; or just select the link (left-click) and press the “Delete” key. www.iddero.com IDDERO HCx-KNX TOUCH PANELS – User Guide...