PACKAGE CONTENTS This package contains: One ST-DWD650IRVP2812-B/W Camera with Junction Box base One installation manual Note: The ST-DWD650IRVP2812-B/W requires a 12VDC 500mA power supply such as the ST-PS12VDC1A or ST-PS12VDC2A. PRODUCT DESCRIPTION The ST-DWD650IRVP2812-B/W is a vandal-proof infrared camera designed around a 1/3” Color SONY Super HAD CCD with 650TVL of resolution, 36 infrared LEDs providing infrared capability up to 90 feet and a 2.8mm –...
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no connectors are broken, damaged, or loose. If equipment appears to be damaged or defective please contact your distributor or Security Tronix at 1-610-429-1511 for assistance.
5. OSD SETTINGS Accessing the camera’s OSD menu and making menu selections is accomplished using the attached “cursor pad”: UP, DOWN, LEFT, RIGHT and PUSH center for entering the selection. V1.0 12-23-13...
(ii) ensure the cables are correctly connected and/or the cables are of the correct impedance. e. Other interference may require a Security Tronix ground loop isolation filter. Additional troubleshooting assistance can be found on-line at www.securitytronix.com...