SRC T-T800-14-01-SL Installation

Table of Contents

Download this manual

Scope of Supply/Bill of Material & Mounting Drawings

Part Number: T-T800-14-01-SL

Part Description: Large Side Stand – TRIUMPH Tiger800

Installation / Parts List / Bill of Material for Mounting

NO.

Lower Plate

Middle Plate

Upper Plate

Nut M6

Countersink Screw M6 X 16

SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters

* Recommended to use the Torque specified in the table

**Deno tes Usage of Liquid Thread Locker in specified Locations

Design and Specification are subjected to change

Description

Quantity

Torque * (N-M)

Rema rks **

Use LiquidThread Locker

10 - 12

Check List

Page 1

Table of Contents

Need help?

Do you have a question about the T-T800-14-01-SL and is the answer not in the manual?

Page 1 Nut M6 Countersink Screw M6 X 16 SRC Design uses Met ric System of Measu reme nt and all dimensions in Millimeters * Recommended to use the Torque specified in the table **Deno tes Usage of Liquid Thread Locker in specified Locations...
Page 2 MOUNTING DRAWINGS Copyright By SRC Design and Specification are subjected to change Page 2...
Page 3 Middle Plate. Insert the Countersunk Screw M6 x 16 (5) – 3 off from the bottom side of the Lower Plate (1), as shown. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4 Nuts to torque, as per specification in the BOM table. The final mounted condition of the Large Side Stand will be as shown in the drawing above. Copyright By SRC Design and Specification are subjected to change Page 4...
Page 5 Vehicle. It is always advised to check loosening of the fasteners after the first 50 kilo meters of ride and at regular intervals. We are showing here the Scope of Supply/ Installation/Parts list & BOM from SRC To the maximum extent possible, our design use the current Mounting/Fitment of the...

Triumph tiger800