Turning The Linkstation On And Off - Buffalo LinkStation 200 User Manual

4
Power Switch
Move the switch up and down to power on and off.
5
USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB printers can be connected. USB
hubs are not supported.
6
LAN Port
Connect to a router, hub, or switch on your Ethernet network with the included Ethernet cable.
7
Link and Activity LED
This LED shows network activity. It blinks green when the LinkStation is accessed over the network.
8
Power Connector
Use the included power cable to connect to a surge protector or outlet.
9
Power Status LED
The LED glows green when the power cable is connected.
10
Anti-Theft Security Slot
Use this slot to secure your LinkStation with a cable lock (not included).
11
Drive 1 Error LED (LS220D/LS220DE only)
If there is an error on drive 1, this LED will light.
12
Drive 2 Error LED (LS220D/LS220DE only)
If there is an error on drive 2, this LED will light.

Turning the LinkStation On and Off

Move the power switch on the back of the LinkStation to the "on" position to turn it on. To turn it off, move the switch
to the "off" position and wait for the unit to fully shut down before unplugging it. Never unplug the AC adapter without
properly shutting down the LinkStation first.
When all the LEDs on the front of the LinkStation turn off, the shutdown process is complete.
8