Advertisement
Quick Links
Advertisement
Related Manuals for Harper & Bright Designs DN33734
Summary of Contents for Harper & Bright Designs DN33734
- Page 1 ASSEMBLY INSTRUCTIONS TWIN BED WITH BOOKCASE (PB) & TRUNDLE & DRAWERS DN33734...
-
Page 2: Detail View
Detail View... -
Page 3: Part List
Part List Part List Hardware List DN33734 (1-2) Vertical bar HB (left) - 1pc Vertical bar HB (right) - 1pc Back panel - 1pc Side rail - 2pcs Leg FB (left) - 1pc Leg FB (right) - 1pc Slats - (1Set = 10pcs) - Page 4 Hardware List DN33734 (1-2) Wood dowel (34pcs) Hex-Head bolts (12pcs) Hex-Head bolts (48pcs) 40mm 1/4"*15 (9.5mm) Hex-Head bolts (6pcs) Pine Knob (6pcs) Horizontal-Hole bolts(60pcs) 3/16"*25mm (1/4")4.5*58mm 45*20*35mm Caster (4pcs) Ph zinc(Knob) (6pcs) Allen key (1pc) 400*30mm Upper slider drawer (3pcs)
- Page 5 STEP 1: 6PCS STEP 2: 4PCS 4PCS...
- Page 6 STEP 3: 4PCS 16PCS 16PCS STEP 4: 12PCS...
- Page 7 STEP 5: STEP 6: 4PCS 4PCS...
- Page 8 STEP 7: 4PCS 8PCS 8PCS STEP 8: 8PCS 68mm Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, otherwise it will cause the board to break. Do not lock the bed slats on the edge of the wood, please hold firmly before screwing ,...
- Page 9 STEP 9: 4PCS 8PCS STEP 10: 2PCS 6PCS 6PCS...
- Page 10 STEP 11: 3PCS 3PCS STEP 12: 7PCS 7PCS...
- Page 11 STEP 13: 16PCS Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you need to leave a certain space at the edges, STEP 14: 12PCS 6PCS 6PCS...
- Page 12 STEP 15: 12PCS 6PCS 6PCS STEP 16: 3PCS 9PCS...
- Page 13 STEP 17: 3PCS 3PCS STEP 18: 3PCS 3PCS Remark: When opening or closing the drawer, Please lift the drawer slightly before opening or closing it.
- Page 14 STEP 19: Push Trundle under the bottom of Captain bed.