Page 2
N otice : 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. Place the item on a flat ground to adjust and make sure it remains stable Tighten up all screws with tools gradually. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
Page 3
CARTON CONTENT: WF212546AAA: [A] x 4 [B1] x 1 [B2] x 1 [C1] x 1 [C2] x 1 [D] x 2 [E] x 1 [F] x 2 [K] x 6 HARDWARE WF212547AAA: [G] x 3 [H] x 3 [I] x 3...
PART LIST Leg table (4pcs) Cross bar 1 (1pc) Cross bar 2 (1pc) Cross bar 3 (1pc) Cross bar 4 (1pc) Cross bar 5 (2pcs) Cross bar 6 (1pc) Top table (2pcs) Seat frame (6pcs) Leg frame 1 (6pcs) Leg frame 2 (6pcs) Cushion chair (6pcs) Back frame (6pcs) HARDWARE LIST...
Page 5
[B1] x 1pc STEP 1 STEP 2 [B2] x 1pc [E] x 1pc [C1] x 1pc [1] x 2pcs [B1] [C2] x 1pc [3] x 2pcs [1] x 4pcs [3] x 4pcs [C1] [B2] [C2] STEP 3 STEP 4 [A] x 4pcs [1] x 8pcs [D] x 2pcs [3] x 8pcs...
Page 6
STEP 5 STEP 6 [F] x 2pcs [2] x 12pcs 100% FINISH TABLE STEP 7 STEP 8 [G] x 1pc [H] x 1pc [I] x 1pc [3] x 3pcs [3] x 3pcs [4] x 1pc [4] x 1pc [5] x 2pcs [5] x 2pcs Page: 6/7...
Page 7
STEP 9 STEP 10 [J] x 1pc [3] x 3pcs [4] x 2pcs [5] x 1pc STEP 11 STEP 12 [K] x 1pc 100% 100% Page: 7/7 FINISH CHAIR FINISH SET...