Epson PowerLite Pro Z8150NL User Manual page 20

Part Names and Functions
Name
[Shutter] button Closes or opens the electric shutter, or mutes the
10
image temporarily to blank the screen.
Any operation that is selected after using the
[Shutter] button, is still is executed. s
[Split] button Press this button to split the screen in two and
11
project two images simultaneously. s
[Auto] button If pressed during projection of computer analog
12
RGB signals, it automatically adjusts the Tracking,
Sync., and Position to project the optimum image.
[Aspect] button The Aspect Ratio
13
is pressed. s
[Lens Shift] button Press to adjust the lens shift. s
14
[ID] button Press to set the remote control ID. s
15
[Help] button Displays and closes the Help screen which shows
16
you how to deal with problems if they occur.
p.93
s
Remote port Connects the optional remote control cable set
17
and outputs signals from the remote control.
When the remote control cable is plugged into
this remote port, the remote receiver is disabled.
[Default] button Reset to default the setting values being adjusted
18
in some configuration menus.
[Zoom] button Press to adjust the zoom. s
19
[Num] button Use this button to enter passwords, IP Address
20
from the Network, and so on. s
[Focus] button Press to adjust the focus. We recommend setting
21
the focus, zoom, and lens shift at least 30 minutes
after you start the projection, because images are
not stable right after turning on the projector.
p.160
s
Function
p.39
p.35
g changes each time the button
p.27
p.159
p.173
p.160
p.45
Name
Numeric buttons Use this button to enter passwords, remote
22
control ID settings, IP Address from the Network,
and so on. s p.175,
[Color Mode] button Each time the button is pressed, the Color Mode
23
changes. s
[Freeze] button Images are paused or unpaused. s
24
[E-Zoom] buttons The [z] button enlarges the image without
25
[z][x] changing the projection size.
The [x] button reduces the parts of images that
have been enlarged using the [z] button. s
26 [Pointer] button Press to activate the on screen pointer. s
27 [Esc] button Stops the current function. If pressed when the
configuration menu is displayed, it moves to the
a
previous menu level. s
Acts as a mouse's right button when using the
optional wireless mouse receiver.
28 [User] button Press to assign a frequently used item from the
available configuration menu items. By pressing
the button the assigned menu item
selection/adjustment screen is displayed, allowing
you to make one-touch settings/adjustments.
p.65
s
Test Pattern is assigned as the default setting.
[SDI] button Changes to images from the SDI input port.
29
p.26
s
c
This button does not function when using
PowerLite Pro Z8150NL/Z8250NL/
Z8255NL/Z8350WNL.
30 [ID] switch Use this switch to enable (On)/disable (Off) ID
settings for the remote control. s
Function
p.45
p.34
p.39
p.41
p.40
p.55
p.173
20