Epson PowerLite Pro Z8150NL User Manual page 17

Part Names and Functions
Name
BNC input port For analog RGB signals from a computer and
2
component video signals from other video
sources.
Video input port For composite video signals from video sources.
3
S-Video input port For S-Video signals from video sources.
4
Cable holder When a thick heavy HDMI cable is connected to
5
the HDMI input port, run a commercially available
cable tie through this holder to prevent the cable
from disconnecting.
Computer input port For analog RGB signals from a computer and
6
component video signals from other video
sources.
Power inlet Connects to the power cable.
7
The shape may differ depending on your projector
model.
Remote port Connects the optional remote control cable set
8
and inputs signals from the remote control. When
the remote control cable is plugged into this port,
the remote receiver on the projector is disabled.
RS-232C port When controlling the projector from a computer
9
or controller, connect it with an RS-232C cable.
This port is for control use and should not
normally be used. s
Wireless LAN unit Connects to the optional wireless LAN unit.
10
port p.190
s
Function
p.133
Name
Monitor Out port Outputs to an external monitor the analog signal
11
from the computer connected to the Computer
input port or the BNC input port. This is not
available for component video signals or other
signals being input to any port other than the
Computer input port or the BNC input port.
p.185
s
SDI port For SDI signals from a video equipment.
12
(PowerLite Pro
Z8450WUNL/
Z8455WUNL only)
HDMI2 input port For video signals from HDMI compatible video
13
equipment and computers. This projector is
compatible with HDCP
LAN port Connects a LAN cable to connect to a network.
14
p.185
s
17
Function
g signals.