Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co., Ltd.
⑤Wait about a minute or so, the module indicator lights up and the programming is complete
(2) Use uboot to burn
Using uboot to burn requires the module to be connected to the network cable, and the module and the computer are
in the same network segment
①When the development board is powered on, enter "6" to enter the web page to burn
② Enter the IP address in the above picture in the browser, you can jump to the burning interface; here you can
choose to burn uboot, openwrt firmware,
Copyright © 2012–20 2 2 , Chengdu Ebyte Electronic Technology Co., Ltd.
factory parameters
E103-W02 User Manual
16
Advertisement
Table of Contents
