Chengdu Ebyte Electronic Technology Co., Ltd.
5.2 Firmware burning
(1) Burn through the openwrt web page
①After the module is powered on, connect to the module's wifi, and then enter 192.168.10.1 in the browser to enter
the openwrt web configuration interface
②Enter the password root to log in, then enter the System-->Backup/Flash Firmware option, and
be updated at the Flash new firmware image.
③ After selecting, click Flash image
④ Enter the verification, click proceed to start burning
Copyright © 2012–20 2 2 , Chengdu Ebyte Electronic Technology Co., Ltd.
E103-W02 User Manual
select the file to
15