Table of Contents
Advertisement
Item
The resolution for the COMPUTER IN1 and COMPUTER IN2 input
signals can be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼
(2) In the RESOLUTION menu select the
(3) Pressing the ► or ENTER button when
(4) To set a custom resolution use the ▲/▼ buttons to select
RESOLUTION
(5) Move the cursor to OK on screen and press the ► or ENTER
(6) To revert back to the previous resolution without saving changes,
• For some pictures, this function may not work well.
http://www.pureglare.com.au
buttons and press the ► button.
The RESOLUTION menu will be
displayed.
resolution you wish to display using
the ▲/▼ buttons.
Selecting AUTO will set a resolution
appropriate to the input signal.
selecting a STANDARD resolution will
automatically adjust the horizontal and
vertical positions, clock phase and
horizontal size.
The INPUT_INFORMATION dialog will be
displayed.
the CUSTOM and the RESOLUTION_CUSTOM box will be
displayed.
Set the horizontal (HORZ) and
vertical (VERT) resolutions using
the ▲/▼/◄/► buttons.
This function may not support all
resolutions.
button. The message "ARE YOU SURE YOU WISH TO
CHANGE RESOLUTION?" appears. To save the setting, press
the ► button.
The horizontal and vertical positions, clock phase and horizontal
size will be automatically adjusted.
The INPUT_INFORMATION dialog
will be displayed.
move the cursor to CANCEL on screen and press the ◄ or
ENTER button.
The screen will then return to the RESOLUTION menu
displaying the previous resolution.
Description
INPUT menu
STANDARD
↓
CUSTOM
↓
41
Advertisement
Table of Contents
