First, Install The Media Server Software; Then, Install The Mp115 Player - NETGEAR MP115 User Manual

User's Manual for the Wireless Digital Media Player MP115

First, Install the Media Server Software

1. Power on your computer and log in as needed.
2. Insert the Resource CD into the CD drive on
the computer. The CD main page loads.
3. Follow the InstallShield Wizard steps and
click Finish when done.
Note: Depending on your location,
complimentary 30-day trials for Internet radio
stations may be available for vTuner and
Rhapsody. The Resource CD automatically
installs vTuner. To use the trial for Rhapsody,
you must also select INSTALL RHAPSODY
Digital Music Service and complete that
installation.
4. Restart your computer and the NETGEAR Media Server software automatically runs. The
Media Server software icon
5. Use the Media Server software to scan your hard drive to locate your video, picture, and music
files. For more information, see
Note: You can use the Options tab on the Media Server to specify which types of files you
want to include, as described in the Media Server online help.

Then, Install the MP115 Player

1. Determine which type of cable your television uses:
• Video cable and Audio cable: These two cables are included, and are compatible with
most televisions in the U.S.
• SCART: This cable is often used in Europe and Australia, and is not included in the
package. However, if you have a SCART cable the MP115 will recognize it, and you can
continue to use these instructions.
• S-Video, or Component Video: These cables are not included in the package. If you use
this type of cabling you will be prompted to select video output settings when the MP115
first starts up.
3-2
appears on the Windows System Tray.
"Media Server Software Tabs" on page 4-2, Chapter
November 2004 202-10038-01
Connecting Your Media Player
4.