Gigabyte H263-S62-AAN1 User Manual page 67

Parameter
PCI Bus Driver Version
SLOT1_OCP3
SLOT2_GZ_2
SLOT3_GZ_1
GENZ_3_
GENZ_4
I/O ROM
(Note1)
SLOT1_OCP3
SLOT2_GZ_2
SLOT3_GZ_1
GENZ_3
GENZ_4 Lanes
(Note1)
SLOT1_OCP3
SLOT2_GZ_2
SLOT3_GZ_1
GENZ_3
GENZ_4
Max Link Speed
(Note1)
PCI Devices Common Settings
Above 4G Decoding
SR-IOV Support
(Note1) This section is dependent on the available PCIe/OCP Slot.
Description
Displays the PCI Bus Driver version information.
When enabled, this setting will initialize the device expansion
ROM for the related PCIe/OCP slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Change the PCIe/OCP lanes. Default setting is Auto.
Configure PCIe max link speed.
Options available: Auto, Gen1, Gen2, Gen3, Gen4, Gen5.
Default setting is Auto.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Enabled, Disabled. Default setting is Enabled.
If the system has SR-IOV capable PCIe devices, this item
Enable/Disable Single Root IO Virtualization Support.
Options available: Enabled, Disabled. Default setting is Enabled.
BIOS Setup
- 67 -