3-8
Installing the PCI Expansion Card
• The PCI riser assembly does not include a riser card or any cabling as standard. To install
a PCI card, a riser card must be installed.
Follow these instructions to install the left PCI Expansion card:
1.
Remove the three screw on the riser bracket to the system.
2.
Lift up the riser bracket out of system.
3.
Remove the screw securing the side bracket to the riser bracket.
4.
Align the PCIe card to the riser guide slot and push in the direction of the arrow until the PCI-E card
sits in the PCI card connector.
5.
Secure the PCIecard with a screw.
6.
Secure the side bracket to the riser bracket with a screw.
7.
Reverse steps 1 - 4 to install the riser bracket back into the system.
1
2
1
1
4
3
System Hardware Installation
- 37 -
4
5