APPENDIX A: SPECIFICATIONS
This appendix provides specifications for the NETGEAR GA622T Copper Gigabit
Ethernet Card.
Cable Specifications GA622T (100/1000BASE-T)
Port Type
Connector
100/1000BASE-T
RJ-45
Note: 1000BASE-T signaling requires four twisted pairs of Category 5
balanced cabling, as specified in ISO/IEC 11801:1995 and ANSI/EIA/TIA-
568-A (1995) and tested for additional performance using testing procedures
defined in TIA/EIA TSB95.
Technical Specifications
General Specifications
Standards Compatibility
GA622T Network
Connection
Host Connection
DC Operating Voltage
Power Consumption
Media
CAT 5 UTP/CAT 5e UTP
NETGEAR GA622T Copper Gigabit Ethernet Card
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3u Auto Negotiation
IEEE 802.3x Flow Control
RJ-45 connector for Category 5 UTP cable
Full-duplex 2000 Mbps (1000 Mbps each way) Gigabit Ethernet
Single slot, short form factor, PCI card with 32-bit connectors
Single slot, long form factor, PCI card with 64-bit connectors
PCI rev 2.2 compliant
Clock speed up to 66 MHz
+5V +/- 5%
14 watts, maximum
2.8A @ + 5VDC
Maximum Distance
325 feet (100 meters)
specifications
A-1