Input; Output - Huawei R100030G1 User Manual

R100030G1 Charging Module
User Manual

7.3 Input

Table 7-3 Input
Item
Input voltage
Voltage system
Frequency
Input current
Power factor
THD

7.4 Output

Table 7-4 Output
Item
Output voltage
Rated output current
Output power
Output current
limiting range
Soft start time
Hibernation function
Standby power
consumption
Issue 05 (2021-11-16)
Specifications
260–485 V AC (rated voltage: 380 V AC)
Three-phase four-wire (3W+PE)
40–70 Hz; rated frequency: 50 Hz/60 Hz
≤ 60 A
≥ 0.98 (load ≥ 50%)
≤ 5% (load ratio ≥ 50%)
Specifications
● Low-voltage mode: 200–506 V DC
● High-voltage mode: 200–1000 V DC (Performance
High-voltage mode: 30 A
Rated power: 30 kW
● When the voltage ranges from the power conversion
● When the voltage ranges from the power conversion
(Power conversion point range: 303–323 V AC)
Maximum: 100 A
3–8s
Supported
≤ 9.3 W (tested average power consumption under 380
V AC rated input voltage at 25°C)
Copyright © Huawei Digital Power Technologies Co., Ltd.
indicators are not assessed if the voltage is below 400
V in high-voltage mode.)
point to 260 V AC, the output is linearly derated from
full load to half load.
point to 485 V AC, the charging module outputs at
full load.
7 Technical Specifications
42