Advertisement
Battery
Compartment
Back View
Helpful Hint: For longer battery life, we recommend use of alkaline batteries.
• Fit the tab on the battery compartment cover into the slot in the phone
and close the cover.
• Tighten the screw with a Phillips screwdriver. Do not over-tighten.
Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove
exhausted batteries from the toy. Battery leakage and corrosion can cause
damage. Dispose of batteries safely.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
"Battery Replacement" instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from the toy before they
are charged.
• If you use a battery charger, it should be examined regularly for damage
to the cord, plug, enclosure and other parts. Do not use a damaged battery
charger until it has been properly repaired.
• If sound or lights from this toy become faint or stop working, it's time to
replace the batteries!
Battery Replacement
For best performance, we recommend
you replace the batteries that came with
this toy with three, new alkaline batteries
upon purchase.
• Locate the battery compartment on the
back of the phone.
• Loosen the screw in the battery compart-
ment cover using a Phillips screwdriver and
lift to remove the cover. (The screw will
remain in the cover.)
• Remove the exhausted batteries from the
phone. Dispose of the used batteries safely.
• Insert three, new AA (LR6) alkaline batteries
as indicated inside the battery compartment.
1.5V x3
"AA" (LR6)
Shown Actual Size
Advertisement
