Advertisement
COE-8
Initial Power UP
The COE-8 requires a 1 minute boot-up process. During this time, you should not attempt to access
the unit at all. To do so might result in database corruption. Remove the network connection for 1
minute whenever powering up the COE-8 units
WEB Page Access
The web pages provide status information on the inputs and outputs of the COE-8, as well as provide
configuration for the unit. Open a browser to the default or current IP address of the unit. Enter the
default username and password:
Factory Defaults:
IP Address
Username
Password
The unit will display the current status of each of the channels and provide buttons for Refresh, Setup
and Logout.
192.168.1.254
admin
admin
Page 3
Advertisement
