Programming Your Diffuser - SCENTED INTERIORS BY DESIGN PRO SCENT DIFFUSER User Manual & Installation Manual

The diffuser will power on when it connects to the power source. The LCD screen will turn off after 1
minute of inactivity. Press the "SET" button for 5 seconds to turn the screen back on.
Local time and date setting
Press the "SET" button for 5 seconds to set the time and date
The hour will begin to flash. Press the "UP" or "DOWN" button to adjust the hour and
save the setting by pressing the "ENT" button. The diffuser operates on Military time
with the hours 0-24. After saving the hour, repeat the process to set minutes and days
After confirming the day of the week, press the "SET" button to save the setting
Diffuser working program and concentration level setting
Press the "SET" button to set the working program and concentration level. There are
up to 5 working programs per day
Select the working period and press the "ENT" button to save. Press the "Set" button
to change the working program
Use the "UP" or "DOWN" button to set the hour and minute and press
"ENT" to save. Repeat the process to select the "Stop" time. The diffuser
operates on Military time with the hours 0-24
Select the concentration "Grade" by pressing the "UP" and "DOWN"
buttons. Press "ENT" to save. There are 10 concentration grade levels.
Recommended concentration grade level: 05. Refer to the concentration
chart below
Press the "UP" button for "ON" and the "Down" button for "OFF" to set
the working program to each day of the week and press "ENT" to save.
If all the programs from Sunday to Saturday are the same, you only
need to set the program for Sunday, and you can select "ON" to repeat
the working program for the following days of the week
Once you have programmed your whole week, press the "SET" button
to save your setting
To set additional working programs, repeat steps 3 to 7. If the programs are different
for each day, you will need to select the daily program individually by repeating steps 3
to 7

PROGRAMMING YOUR DIFFUSER