Table of Contents
Advertisement
SETTING UP YOUR DIFFUSER
Find the ideal location for your diffuser. Insert the key and rotate it to open the
device
Set the device to battery mode or USB mode. Insert four D batteries or plug the
USB cable into an electrical outlet
Affix the mounting bracket to the wall using the three screws provided
Note: If you do not use the screws, allow the adhesive from the 3M to set for 24
hours.
Hang the device on the mounting bracket
FRAGRANCE BOTTLE INSTALLATIOn
Insert the key and rotate it to open the device
Remove bottle and unscrew the sprayer head. Keep empty bottle for maintenance
Screw the sprayer head into your new bottle of Scented Interiors By Design fragrance
oil. Note: Do not over or under tighten the diffuser head. Once the diffuser head is
attached to the bottle, do not flip it over, as this causes oil to spill, and the diffuser
might malfunction.
Insert oil bottle back into the device, aligning the air peg located on the back of the
spray head
Advertisement
Table of Contents
Need help?
Do you have a question about the PRO SCENT DIFFUSER and is the answer not in the manual?
Questions and answers