Default Configuration - NETGEAR RangeMax DG834N Setup Manual

Wireless ADSL2+ Modem Router Setup Manual
Interface Specifications
LAN:
WAN:

Default Configuration

You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button for
three seconds. Your device will return to the factory configuration settings shown in the table
below.
Feature
Router Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Internet Connection
WAN MAC Address
WAN MTU Size
Port Speed
A-2
10BASE-T or 100BASE-Tx, RJ-45
ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
ITU Annex A or B
Default Behavior
http://www.routerlogin.net or http://www.routerlongin.com
admin
password
Use Default address
1500
AutoSense
v1.0, 2006-4
Technical Specifications