Connecting The Fvm318 To Your Lan; Procedure 2-2: Connecting The Firewall To Your Lan - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall

Connecting the FVM318 to Your LAN

This section provides instructions for connecting the FVM318 Cable/DSL ProSafe Wireless VPN
Security Firewall to your LAN. The Resource CD included with your firewall contains an
animated Installation Assistant to help you through this procedure.

Procedure 2-2: Connecting the Firewall to Your LAN

There are three steps to connecting your firewall:
Connect the firewall to your network.
1.
Log in to the firewall.
2.
Connect to the Internet.
3.
Follow the steps below to connect your firewall to your network.
Connect the firewall.
1.
Turn off your computer and cable or DSL Modem.
a.
Disconnect the Ethernet cable (A) from your computer which connects to the modem.
b.
A
Figure 2-1: Disconnect the cable or DSL Modem
2-4
Cable or DSL modem
Connecting the Firewall to the Internet