Forno FMWDR300024 Installation Manual
Hide thumbs Also See for FMWDR300024:

Advertisement

Available languages

Available languages

INSTALLATION MANUAL
MODEL:
EM034D4NA
FMWDR300024
13/05/21
dd/mm/yy

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FMWDR300024 and is the answer not in the manual?

Questions and answers

Summary of Contents for Forno FMWDR300024

  • Page 1 INSTALLATION MANUAL MODEL: EM034D4NA FMWDR300024 13/05/21 dd/mm/yy...
  • Page 2 PLEASE CONTACT CUSTOMER installed Anti-Tip block. SERVICE · This Microwave Drawer must be electrically info @ forno.ca - 1 866-231-8893 grounded in accordance with local codes. · Make sure the wall coverings and the cabinets IMPORTANT NOTES TO THE INSTALLER ·...
  • Page 3: Clearances And Dimensions

    CLEARANCES AND DIMENSIONS · · Dimensions that are shown in Figure 1 must be Check location where the Microwave Drawe r will used. Given dimensions provide minimum be installed for proper electrical supply · clearance. Locate electrical outlet in the shade d Your oven can be built into a cabinet or wall by area in the upper left-hand corner of the cutout.
  • Page 4: Anti-Tip Block

    ANTI-TIP BLOCK ELECTRICAL OUTLET Su gge ste d el ectric al out let loc ati on Anti Tip block 4 '' Figure 4 Figure 3 The electrical requirements are a 120 volt 60 Hz, AC NORMAL INSTALLATION STEPS only,l5 amp. or more protected electrical supply. It is ANTI-TIP BLOCK INSTALLATION INSTRUCTIONS To reduce the risk of tipping of the drawer, the Anti-Tip recommended that a separate circuit serving only this...
  • Page 5: Drawer Installation

    DRAWER INSTALLATION Mounting flange Screws Figure 5 1. P lace the drawer adjacent to the wall or cabinet opening.Plug the power supply cord into the electrical outlet. 2. Care fully guide the drawer into the prepared opening. Avoid pinching the cord between the oven and the wall. 3.
  • Page 6 MANUEL D’INSTALLATION MODÈLE: EM034D4NA FMWDR300024 13/05/21 dd/mm/yy...
  • Page 7: Manuel D'installation

    VEUILLEZ CONTACTER LE SERVICE À LA • Le microonde à tiroir doit être relié à la terre CLIENTÈLE conformément aux codes locaux. info@forno.ca - 1-866-231-8893 • Assurez-vous que les revêtements muraux et les REMARQUES IMPORTANTES POUR armoires autour du microonde à tiroir puissent L’INSTALLATEUR...
  • Page 8 DIMENSIONS ET ESPACEMENTS • Utilisez les dimensions illustrées à la figure 1. Les • Vérifiez que l’endroit où le microonde à tiroir sera dimensions indiquées fournissent l’espacement installé est bien alimenté en électricité. minimal. Repérez la prise électrique dans la zone •...
  • Page 9: Prise Électrique

    BLOC ANTIRENVERSEMENT PRISE ÉLECTRIQUE Emplacement conseillé pour la prise électrique Bloc antirenversement Figure 4 Figure 3 Les besoins en électricité sont de seulement 120 V CA PROCÉDURE D’INSTALLATION NORMALE 60 Hz 15 A ou exigent une alimentation électrique plus INSTRUCTIONS D’INSTALLATION DU BLOC ANTIRENVERSEMENT protégée.
  • Page 10 INSTALLATION DU MICROONDE À TIROIR Bride de montage Figure 5 1. Placez le microonde à tiroir près du mur ou de l’ouverture de l’armoire. Branchez le cordon d’alimentation à une prise électrique. 2. Accompagnez avec soin le four à tiroir dans l’ouverture que vous avez préparé.

This manual is also suitable for:

Em034d4na

Table of Contents