Download Print this page

NETGEAR ProSafe FWAG114 Specifications page 2

Dual band wireless vpn firewall with 802.11a/b/g access point and 10/100 mbps switch
Hide thumbs Also See for ProSafe FWAG114:

Advertisement

FWAG114
System Requirements
- Cable, DSL, or wireless
broadband modem and
Internet service
- Network card for each
connected PC
- 802.11a, b, or g wireless
network card on each
portable PC
- Network software (i.e. Windows)
- Internet Explorer 5.0 or higher
OR Netscape
®
Navigator 4.7
or higher
Package Contents
- FWAG114 ProSafe Dual Band
Wireless Firewall
- Power adapter
- 3m (10-ft.) Ethernet cable
- Installation guide
- Resource CD
- Warranty/Support
information card
4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
®
©2004 NETGEAR, Inc. NETGEAR
, the
Netgear Logo, ProSafe, Auto Uplink, and
Everybody's connecting are trademarks
or registered trademarks of Netgear,
Inc. in the United States and/or other
countries. Microsoft, Windows, and the
Windows logo are trademarks or
registered trademarks of Microsoft
Corporation in the United States and/or
other countries. Other brand and product
names are trademarks or registered
trademarks of their respective holders.
Information is subject to change without
notice. All rights reserved.
** Free basic installation support
provided for 90 days from date of
purchase. Advanced product features
and configurations are not included in
free basic installation support; optional
premium support available.
D-FWAG114-2
Interoperable with:
0560 !
Protected Access
ProSafe Dual Band Wireless VPN Firewall
Technical Specifications
• Physical Interfaces:
- LAN ports: Four (4) 10/100 Mbps auto-sensing,
Auto Uplink RJ-45 ports (one Cat 5 UTP cable
included)
10/100BASE-T Ethernet RJ-45
- WAN port:
port to connect to any broadband modem
that has an ethernet LAN connection
• Security Features:
- Firewall: Stateful Packet Inspection (SPI) to prevent
notorious Denial of Service (DoS) attacks, Intrusion
Detection System (IDS) including logging, report-
ing, and e-mail alerts (address, service and protocol),
Web URL content filtering, prevent replay attack
(reassembly attack). Advanced features include
block Java
/URL/ActiveX
FTP/SMTP/RPC program filtering
- VPN Functionality: Two (2) dedicated VPN tunnels,
Manual key and IKE Security Association (SA)
assignment with pre-shared key and RSA/DSA
signatures, PKI features with X.509 v.3 certificate
support, key life and IKE lifetime time settings,
perfect forward secrecy (Diffie-Hellman groups 1
and 2 and Oakley support), operating modes
(Main, Aggressive, Quick)
- IPSec support: IPSec-based 56-bit (DES) or 168-
bit (3DES) encryption algorithm, MD5 or SHA-1
hashing algorithm, AH/AH-ESP support, remote
access VPN (client-to-site), site-to-site VPN, IPSec
NAT traversal (VPN pass-through), tunnel or
transport operating mode
- Wireless Encryption: IEEE 802.11b/g Access
Point, up to 128-bit WEP (152-bit for 802.11g)
encryption IEEE 802.11a Access Point, up to
152-bit WEP encryption
- Mode of Operation: Network Address Translation
(NAT), static routing, unrestricted users per port
- IP Address Assignment: Static IP address assign
ment, internal DHCP server on LAN, DHCP
client on WAN, PPPoE client support
• Performance Features:
- Throughput: 20+ Mbps WAN-to-LAN throughput
• Management Features:
- Administration interface: Web graphic user inter
face, user name and password protected; Smart
Wizard and Auto Detect for basic parameter settings;
remote management support authenticated through IP
address or IP address range, and password; secure
sockets layer (SSL) support for remote managment;
config changes/upgrades through web GUI
- Configuration and upgrades: Upload and
download configuration settings, firmware
upgradable flash memory, and DRAM
- Logging: WELF-based logging format, SYSLOG,
e-mail alerts
• Protocol Support:
- Network: IP routing, TCP/IP, UDP , ICMP, PPPoE
- IP Addressing: DHCP (client and server)
- Routing: RIP v1, RIPv2 (Static Routing, Dynamic
Routing)
TM
- VPN Security: IPSec (ESP, AH), MD5, SHA-1,
DES, 3DES, IKE, PKI
• User Support:
• RFC Support:
based on extension,
®
• Functions:
• Maintenance:
• Hardware Specifications:
• Environmental Specifications:
• Warranty:
- LAN: Up to 253 total users (96 users on WLAN)
PPTP client and server
IPSec tunnel mode
Authentication Header Protocol
HMAC-MD5-96
HMAC-SHA1-96
DES-CBC Cipher algorithm
Encapsulation Security Payload Protocol
Domain of Interpretation
Internet Security Association and
Key Management Protocol (ISAKMP)
Oakley
DHCP server
DHCP client
IP routing (RIP1, RIP2)
NAT (many-to-one)
Compression Control Protocol
IP Control Protocol
Certificate Request Message Format
PPPoE
Smart Wizard to automatically detect ISP Address type
(static, dynamic, PPPoE), Port Range Forwarding, Exposed
Host (DMZ), Enable/Disable WAN Ping, DNS Proxy,
MAC Address Cloning/spoofing, NTP support, URL
Content Filtering, E-mail Alerts, DHCP Server (Info and
display table), PPPoE login client support, Telstra BigPond
Cable login support, WAN DHCP Client, Diagnostic
tools (ping, trace route, other), Port/service blocking, Auto
Uplink on switch ports
Save/Restore Configuration, Restore Defaults, Upgrades
via Web Browser, Display Statistics, Logging, SYSLOG
- Processor: Broadcom BCM 4702 150 MHz MIPS32
- Wireless card: 802.11a and 802.11g - Atheros 5212
- Memory: 4 Mb Flash, 8 Mb DRAM
- Power requirements: 12VDC, 1.2A; plug is localized to
coutry of sale
- Dimensions: H: 2.8 cm (1.2"); W: 19 cm (7.5");
D: 13 cm (5.1")
- Weight: .73 kg (1.61 lb.)
- Operating temperature: 0 to 40°C (32 to 104°F)
- Operating humidity: 90% maximum relative humidity,
noncondensing
- NETGEAR 3-year warranty
(RFC 2637)
(RFC 2401)
(RFC 2402)
(RFC 2403)
(RFC 2404)
(RFC 2405)
(RFC 2406)
(RFC 2407)
(RFC 2408)
(RFC 2412)
(RFC 2131)
(RFC 2131)
(RFC 2453)
(RFC 1631)
(RFC 1974)
(RFC 1332)
(RFC 2511)
(RFC 2511)

Advertisement

loading