Table of Contents
Advertisement
QUICK SET-UP GUIDE
ITEMS REQUIRED
(not supplied)
• For Standard coupler: 2" hitch ball and ball mount
• For Max Coupler: 2" receiver with ball mount 1" shank hole
• Tow vehicle 7 pin wiring & brake controller
• Trailer license plate & registration
(or trailer transport permit)
• Some vehicles may require a 7-Pin extension
TRAILER SET-UP
• Install License plate
• Prepare tow vehicle hitch
• Regular coupler: install 2" hitch ball
• Max Coupler: install supplied yoke on tow vehicle ball mount.
• Attach safety chains
• Secure break away cable
• Plug in 7 pin trailer cable to tow vehicle
• Check trailer lights and brakes for proper operation
NEW TRAILER CHECK LIST
• De-winterize &/or sanitize potable water system
• Charge batteries
• Turn on main circuit breaker
• Check tire pressure
• Fill propane bottle
• Re-torque wheels refer to the maint schedule
• Review maintenance schedule and ensure specific internals
(i.e. re-torque suspension bolts after 1st week of use)
are followed
Note: Hitch ball and/or ball mount not supplied with trailer.
Refer to the applicable section of this manual for specific
instructions to carry out items in the Quick Setup and New
Trailer Check Lists.
4
(hitch height = 21")
5
Advertisement
Table of Contents
Need help?
Do you have a question about the EXPEDITION 2.0 and is the answer not in the manual?
Questions and answers
Hi, Can you tell me how the tongue weight of a 2022 Expedition 2.0 is determined & published to be "290 lbs"?? I put a scale under the point where the trailer pins to my Jeep, on the Max Coupler, and put all the tongue weight on it, it reads closer to "400 lbs". This is w/ the trailer completely unloaded and w/ the spare tire removed from the front mount. That is a pretty big discrepancy. Maybe w/ the water tank full, (which it wasn't when I weighted it), it puts more weight on the back of the trailer, balancing it better, and lifting some off the tongue?? Thanks in advance.
The tongue weight of the 2022 OFF GRID TRAILERS Expedition 2.0, published as 290 lbs, is determined based on the trailer's design and load distribution. It is specified on the trailer certification label, which is located on the left side of the trailer on the A-frame/tongue. This label provides key weight ratings, including tongue weight.
This answer is automatically generated