NETGEAR ProSafe GSM7328Sv2 Datasheet page 2

ProSafe 24-port and 48-port Gigabit L3 Managed Stackable Switches
®
File Servers
Gigabit NICs
GA311
Wireless Adapter
WAG5111
Wireless Adapter
WAG5111
Technical Specifications
• Physical Interfaces
– 24 or 48 RJ45 10/100/1000 ports with
Auto-Uplink™
– 4 shared SFP ports for fiber Gigabit
interfaces
– 2 built-in 10 Gigabit SFP+ ports
– 2 optional 10 Gigabit module bays
– RS-232 console
– USB port ‡
• Layer 2 Services
– IEEE 802.1Q Static VLAN (Up to
4k VLAN ID)
– IEEE 802.1p Class of Service (CoS)
– IEEE 802.1D Spanning Tree Protocol
– IEEE 802.1v Protocol VLAN & Port
VLAN
– Voice VLAN
– Guest VLAN
– IP subnet VLAN
– MAC-based VLAN
– IEEE 802.1 Q-in-Q
– IEEE 802.1w Rapid Spanning Tree
– IEEE 802.1s Multiple Spanning Tree
– IEEE 802.3ad Link Aggregation (Static
or LACP) up to 48 trunks
– IEEE 802.1x Port Access Authentication
– IGMP v1, v2, v3 snooping support
– IGMP querier
– Network storm protection including
broadcast, multicast and unicast traffic
– Static multicast filtering
– Port locking
– Ingress rate limit in 1 Kbps increments
– GARP/GVRP/GMRP
– DHCP snooping
– IP source guard
– Dynamic ARP inspection
– TACACS+
– LLDP
– LLDP-MED
**The features listed assume the switch is running 8.0 release or newer.
***IPv6 routing and IP multicast routing is available for v1 hardware with software license upgrade.
‡
v2 only
GSM7352S
Linked Aggregation
Resilient Stacking:
GSM7328S
GSM7352S
ProSafe Dual Band
Access Point
– ISDP
– sFlow
– DoS
– Private group
– Protected port
– DHCP L2 relay
– MLD v1, v2 snooping
• Layer 3 Services
– VLAN routing
– Port routing
– RIP v1/v2 (RFC 1058, 2453)
– OSPF v2/v3 (RFC 1583, 2328)
– OSPF equal-cost multi-path
(4 - ECMP routes)
– VRRP (RFC 2338, 2787) 64 instances
– Access control lists (ACL) - MAC, IP , TCP
– ACLs – 1,024 Global
– ACL over VLAN
– Dynamic ACL
– COS
– DiffServ QoS (RFC 2998)
– DNS Caching
– DHCP/BOOTP relay -primary and
backup (RFC 3046, option 82)
– ICMP throttling
– DHCP v4/v6 server
– Captive portal
– Auto VoIP
– IP Helper
– PIM-DM (RFC 3973)
– PIM-SM (RFC 4601)
– IGMP v2,v3
– IGMP proxy
– DVMRP (RFC 1075)
– IPv6 unicast routing
– Neighbor discovery
– IPv6 tunnel
– OSFPv3 (RFC 2740)
– IPv6 PIM-SM
– IPv6 PIM-DM
– MLD (RFC 2710)
– MLD proxy
– DNSv6 (RFC 4472)
GSM7328S
ProSafe VPN
Firewall 200
FVX538
Gigabit NICs GA311
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
GSM7328Sv2, GSM7352Sv2
Application Servers
Gigabit NICs
GA311
Modem
Internet
Modem
• Switch Management Specifications
– SNMP v1, v2c, v3 with multiple
IP addresses
– RFC 1157, 1901-1910, 2574, 2575
– RFC 768 UDP
– UDP Relay
– RFC 854-859 telnet
– RFC 951 BOOTP
– RFC 1213 MIB II
– RFC 1757 RMON groups 1,2,3, and 9
– RFC 1215 SNMP traps
– RFC 1493 Bridge MIB
– RFC 1643 Ethernet Interface MIB
– RFC 1534 DHCP and BOOTP
interoperation
– RFC 2131, 2132 DHCP and BOOTP
– RFC 2865 RADIUS (both switch and
management access)
– RFC 2866 RADIUS accounting
– RFC 3580 VLAN assignment via
RADIUS (Dynamic VLAN)
– Private enterprise MIB
– Port mirroring support
– Flow-based mirroring
– RFC 2030 Simple Network Time
Protocol (SNTP)
– RFC 1027 Proxy ARP
– SYSLOG
– TFTP , SFTP , HTTP , SCP , or local USB flash
firmware upgrade
– RFC 1519 CIDR
– Proxy ARP
– DNS lookup
– Port description
– Auto install
– IPv6 management
– Dual image ‡
• Single IP Address Management
(firmware version 7.3 or higher)
– Manage up to 48 fully
managed switches
– Feature can be used with the
following models:
- FSM726E, FSM7226RS, FSM7250RS
- FSM7328S, FSM7352S, FSM7328PS,
FSM7352PS
- GSM7224R, GSM7248R
- GSM7328S, GSM7352S