Table of Contents
Advertisement
Quick Links
DYNABLAST PRESSURE WASHER
OWNER'S MANUAL
2.
Overview & Warnings
2.
Assembly Instructions
3.
Safety Precautions
5.
Start Up Instructions
6.
Operating &Working with Detergents
6.
Shutdown Instructions
7.
Storage, Winterization & Transport
7.
Basic Maintenance
9.
Troubleshooting
11.
Warranty Information
RC · CRDET · CRDE · CRDG · BG · CRBG SERIES
IMPORTANT: Do not operate this equipment until you have read and understand all
of the enclosed Owner's Manuals. Carefully read all Warnings, Safety Precautions,
Assembly and Operating Instructions, Maintenance and Storage information.
CUSTOMER SERVICE HOTLINE:
1-888-881-6667
Visit our website:
www.dynablast.ca
Advertisement
Table of Contents
Related Manuals for Dynablast RC Series
Summary of Contents for Dynablast RC Series
- Page 1 DYNABLAST PRESSURE WASHER OWNER’S MANUAL Overview & Warnings CUSTOMER SERVICE HOTLINE: 1-888-881-6667 Assembly Instructions Safety Precautions Visit our website: www.dynablast.ca Start Up Instructions Operating &Working with Detergents Shutdown Instructions Storage, Winterization & Transport Basic Maintenance Troubleshooting Warranty Information RC · CRDET · CRDE · CRDG · BG · CRBG SERIES IMPORTANT: Do not operate this equipment until you have read and understand all of the enclosed Owner’s Manuals.
-
Page 2: Machine Overview
MACHINE OVERVIEW Note: Check for visible shipping damage. Shipping damage will cause problems in the operation of this unit. Contact the Customer Service Hotline immediately if parts are missing or damaged. NOTE: Any instructions that are bound by this grey box are ELECTRIC MODEL SPECIFIC instructions only. If you purchased a gas unit, please disregard all information within these grey boxes. -
Page 3: Important Safety Precautions
IMPORTANT SAFETY PRECAUTIONS SAFETY OVERVIEW * ELECTRIC MODELS ONLY * This unit was designed for specific applications. It should 13. Connect Machine to a GFCI protected receptacle or not be modified or used for any application other than a GFCI protected circuit breaker that for which it was designed. -
Page 4: Grounding Instructions
IMPORTANT SAFETY PRECAUTIONS (CONT’D) SAFETY PRECAUTIONS CAUTION: The pressure has been preset by the (CONT’D) manufacturer. DO NOT attempt to adjust the pressure 31. DO NOT use this machine to spray chemicals, acids, higher than its factory setting. Doing so will damage the solvents, insecticides or any flammable material. -
Page 5: Start-Up Instructions
START UP INSTRUCTIONS PUMP Connect the desired Quick Connect nozzle to the Remove the shipping plug on your pump’s crankcase spray gun by pulling the collar on the socket back, and install the provided plug/ dipstick (yellow). insert the nozzle and slide the collar back into place. -
Page 6: Pressure Washing
OPERATION & WORKING WITH DETERGENTS PRESSURE WASHING 10. Pull trigger to start spraying detergent/ water mixture. begin spraying and high pressure washing, disengage the safety latch on the gun and trigger Note: This detergent application reduces the pressure the gun. Hold gun and lance firmly. of the system. -
Page 7: Storage, Winterizing & Transport
STORAGE, WINTERIZING & TRANSPORT STORAGE on for a short period of time until the pump outlet “spits” out anti-freeze. When the outlet fitting spits CAUTION: Always follow the proper Shutdown out the anti-freeze soloution, it has been evenly Instructions on page 6 before storing the pressure washer distributed throughout the pump and it can now be or accessories. -
Page 8: Water Screen
BASIC MAINTENANCE (CONT’D) WATER SCREEN PUMP OIL CHANGE CAUTION: If the screen is not kept clean, the flow of water to the pressure washer will be restricted and the NOTE: Check the pump before every use as well as the pump maybe damaged. -
Page 9: Troubleshooting
TROUBLESHOOTING IMPORTANT: Always follow the Shutdown Instructions (see page 6) before working on the unit or the accessories. Always discharge residual pressure and turn the engine OFF. SYMPTOM POSSIBLE CAUSE SOLUTION Engine will not No gasoline. Fill gas tank. start. Oil level low. -
Page 10: Customer Service Hotline
Trigger will Gun safety-lock engaged. Release safety lock. not move. CUSTOMER SERVICE HOTLINE: 1-888-881-6667 If you encounter any difficulties not listed above, please contact Visit our website: the Customer Service Hotline. www.dynablast.ca... -
Page 11: Warranty Information
Be sure to pack the unit in a strong carton and pad tightly to avoid damage. Damage in transit is NOT covered by warranty. Warranty is void if any devices or accessories other than those distributed or recommended by Dynablast are attached to or connected with the equipment in such a manner that the original factory construction is altered.
Need help?
Do you have a question about the RC Series and is the answer not in the manual?
Questions and answers