Advertisement
Quick Links
Dear respiratory user!
The Baby Control device is designed for the peace of mind of parents. They know that with
prescribed use, your child is under constant supervision during sleep. Doctors and nurses
recommend using a respiratory monitoring device until the child is 1 year old.
We would like to introduce the Baby Control respiratory monitor family 2230. Members of
the device family differ in how many sensor plates they have. This can be 1, 2 or 3 sheets,
depending on the type. The most important features of the family of devices are large sensor
pads, digitally adjustable sensitivity, event memory, safety double siren and uniquely long
warranty.
Unpack the device. We find the operating instructions and the warranty letter, the central
unit, for this we connect the sensor pads, batteries and wire fastening spirals. With spirals,
the sensor sheets wire is attached to the crib.
A small star screwdriver is required to insert the batteries, for safety reasons we fasten the
battery cover this way so that the baby cannot open the holder. A durable pencil battery is
required to operate the device, no accumulator can be used. When the element is inserted
correctly, the device acknowledges with a beep that it has become operational.
Advertisement
Related Manuals for Baby Control BC-2230
Summary of Contents for Baby Control BC-2230
- Page 1 Dear respiratory user! The Baby Control device is designed for the peace of mind of parents. They know that with prescribed use, your child is under constant supervision during sleep. Doctors and nurses recommend using a respiratory monitoring device until the child is 1 year old.
- Page 2 How to place the sensor pads in the crib? The sensor pads of the Baby Control respiratory monitor can be placed in several ways. The device can be used for all types of mattresses available on the market.
- Page 3 How to turn on the device? Permanently, press the red switch button for 2 seconds, waiting for a numeric value to appear on the display. This is factory setting "3". Operational condition, everything is fine. This is how the device works when a level higher than the set value is detected.
- Page 4 "E" signal is lit, the battery must be replaced. The Baby Control device is designed for the peace of mind of parents. They know that with prescribed use, their child is under constant supervision during sleep.