Table of Contents
Advertisement
2.5.3
NVMe Storage Module (M.2 2280 M-Key) Installation
For this process you will need a Phillips head screwdriver.
Step 1: Access the M.2 2280 M-Key slot by removing the two (2) screws on the panel
marked 'SODIMM/M.2 2280' on the bottom-side of the chassis as shown below.
Step 2: Insert NVMe Storage Module.
Step 3: Reaffix the two (2) screws removed during step 1.
Chapter 2 – Hardware Information
40
Advertisement
Table of Contents
