Appendix A: Default Settings - NETGEAR ProSafe FS726T User Manual

APPENDIX A: DEFAULT SETTINGS

This appendix provides default settings for the NETGEAR Smart Switches. You can always configure the
switch to default settings by using the Factory Reset function from a Web browser.
Table A-1. Default Settings
FEATURE
Port Speed
Port Duplex
Flow Control (half duplex)
Flow Control (full duplex)
IP Configuration
Password
VLAN
Link Aggregation (Trunk)
Traffic Prioritization (QoS)
DEFAULT SETTING
Auto-negotiation
Auto-negotiation
Enabled
Enabled
DHCP enabled
password
Port-Based VLAN
Disabled
Optimized for flow control, all ports set normal priority
Page 19 of 19