ON Control SUSB-E8 Quick Start Manual

SUSB-E8
EXPANSION UNIT
FOR CONTROL AND
MONITORING PANEL.
Description
The expansion unit is used to monitor
fire/smoke dampers in conjunction with the
control and monitoring unit.
If there are too many dampers to be connected
to the control and monitoring unit, the number
of inputs can be increased with expansion
units. One or more units can be connected.
There is no upper limit. Each expansion unit
can control up to 16 dampers and has eight
groups. This means that all the inputs can have
two dampers if necessary.
General
• Must be connected to the control and
monitoring unit
• Eight groups
• Damper position indication
• Input for more expansion units
• Integrated transformer
• 24 V supply to actuator
Maximum configuration.
Up to 16 actuators (dampers) can be connected
in eight groups.
___________________________________________________________________
ON Control AB, Hjortstigen 5, SE-507 70 GÅNGHESTER, Sweden
Tel: +46 33 25 65 70, Mobile: +46 70 625 86 00, Fax: +46 33 25 69 20
Beskrivning SUSB-E8 eng V2.doc
Installation
Designed for wall installation.
Supply voltage
230 VAC 50 Hz 110VA. Protected with 2A at
least.
Protection class
IP65.
Ambient temperature
Max +30°C, min 0°C.
Weight
3 Kg
Outputs
• 8 groups for dampers
• For next expansion unit.
Inputs
• For next expansion unit.
• For the main unit
Size
255*180*103 mm. (b*h*d)
2010-02-18
Page 1