Contents Safety notices ........................ 3 Statutory warranty / guarantee ................19 Lockable Cargo Box Lid ................... 4 General information ..................... 4 Intended use ........................5 Scope of delivery ......................6 Technical data ........................6 Assembly ......................... 7 General notes on care ....................12 Additive Rack on Cargo Box Lid ................
Safety notices These assembly instructions contain various types of notice. The notices are designed as follows: Danger Notice Potential hazards for your health Provides information about how and the health of your co-riders and to handle the product or refers to other road users if you fail to observe a passage in the assembly instruc- the respective instructions or do not...
General information Fig. 1 With the Lockable Cargo Box Lid, you can transform your FS200 Life into the ideal and safe means of transport. Please read these assembly instructions carefully in order to adjust, assemble and use the lid correctly.
Intended use Please note that the lid has a maxi- Please note: There must never mum load capacity of 10 kilograms. be people or animals in the cargo Overloading the lid can lead to box when the lid is closed. damage or even breakage of the lid.
Scope of delivery Fig. 2 EPP lid Lock hook Star grip screws 4 pcs Hinge set Keys The Cargo Box Lid is shipped in a closed transport carton. Remove the transport protection material and dispose of it according to the local waste disposal regulations in your municipality at the appropriate disposal point.
If you have any questions about the assembly, you can find video instructions at www.cagobike.com. You are also welcome to contact the Ca Go team or a Ca Go dealer / service partner.
Page 8
Fig. 4 Now place the lock hook as shown in the picture (Fig. 4) and fix it with the screws you have removed. Please make sure that the lock hook is in the right position – nose facing inwards. Fig. 5 Remove the side screws from the panels (Torx key TX30).
Page 9
Fig. 6 Now place the EPP lid on the box collar at the back (picture) and fold out the hinges, caution: danger of jamming. Now place a spacer plate (pay attention to the right and left) at the recesses between the hinge and the box. Align the holes of the hinge and the spacer plate with the threads in the rail.
Page 10
Fig. 7 Fig. 8 On the locking mechanism at the bottom of the cover (Fig. 7 & 8) there is a screw incl. nut. If the lock cannot be closed when the lid is in place, or only with consid- erable force, the locking screw must be turned in further.
Page 11
To close the lid you have to put the lid down and press down the lock flap (Fig. 10). You will hear and feel a fine click. After successful assembly, the lid closes precisely and without resistance. Fig. 10 To open the lid lock, simply press the button.
General notes on care Do not use aggressive cleaning The screw connections should be agents, acids or solvents for clea- checked regularly for tightness and ning. This may attack or damage fastened if necessary. the surfaces. The stability of the components may then no longer be guaranteed.
Additive Rack on Cargo Box Lid General information Fig. 1 The additive rack can be mounted on the cargo box lid of the FS200 Life to transport objects. The maximum load is limited to 8 kg, whereby the trans- port items may be attached BETWEEN, but not ON the rails. In addition, the additive rack offers attachment points inside the lid.
General information The transport of people is strictly The additive rack may only be prohibited. mounted and used on the Cargo Box Lid provided for this purpose. It is only released for the purpose described here. When transporting objects, ensure that the load is adequately secured.
Scope of delivery Fig. 2 2x Rail 6x Washers 6x Rectangular mounting plate 6x Screw 1x Tool Technical data Dimensions LxWxH: 740 x 90 x 90 mm Weight: approx. 0.57 kg Material rail: Aluminium Material end caps: Plastic...
Assembly Fig. 3 Fig. 4 First, the six fastening points marked in the Cargo Box Lid (Fig. 3) must be drilled through with the aid of the enclosed tool (Fig. 4). Two procedures are suitable for this purpose: 1. The tool can be clamped in a cordless screwdriver and used as a drill. To do this, use the marks visible on the outside of the lid as a guide and drill the holes from the outside to the inside.
Page 17
If accessibility for assembly is When using the manual method, not guaranteed, the lid should be gloves should be worn to avoid dismantled in advance. In addition, injuries caused by sharp edges on excessive loads should be avoided the tool. when the lid is open, as otherwise the hinges may be deformed.
Fig. 6 ow the mounting plates can be connected to the spacer sleeves from the inside using the screws (Fig. 6). The tightening torque is 4–6 Nm. Before each ride, please check that the Additive Rack is properly mounted. General notes on care Water is often sufficient for cleaning and maintaining the top rack.
You can find more details on the guarantee on our website: www.cagobike.com Export to the USA and Canada is not permitted (product liability)! Service If you have questions concerning this assembly instructions, please contact your Ca Go partner/dealer or your Ca Go service team.