Contents Safety notices ........................3 General information ....................... 4 Intended use ........................5 Scope of delivery ......................6 Assembly ........................... 7 General notes on care ....................10 Statutory warranty / guarantee ................11 Service ..........................11 The present assembly instruction is the translation of the original assembly instructions.
Safety notices This user manual contains various types of notice. The notices are designed as follows: Danger Notice Potential hazards for your health Provides information about how and the health of your co-riders and to handle the product or refers to other road users if you fail to observe a passage in the user manual that the respective instructions or do not...
General information Fig. 1 The Bike Garage is a cover for the FS200 to protect it from weather and dirt. It can be used indoors and outdoors. It can be used with the FS200 with an open box, with a lid, with the Ortho-Safety-Collar, and with the All-Weather- Top.
The DANGER OF SUFFOCATION! material can melt or ignite on con- Children could accidentally tact. The Bike Garage can only be become entangled and tangled. put on when the brakes have cooled This is not a children‘s toy!
Scope of delivery Fig. 2 The Bike Garage is a one-piece unit and is delivered in its own integrated bag. (Fig. 2). No additional tools are required for assembly.
Fig. 4 Fig. 5 Fig. 6 Place the packed Bike Garage on the handlebars with the arrow pointing towards the front wheel, pull open the side zip and fix the two Velcro fasteners to the handlebars. The included tarpaulin can now be unfolded. The outside is labelled, the front...
Page 8
Fig. 7 Pull the front part marked „Front“ over the front wheel (Fig. 7). At the bottom edge there is a Velcro fastener to secure the Bike Garage through the spokes (Fig. 8 and Fig. 9). Fig. 8 Fig. 9...
Page 9
Velcro fastener (Fig. 8 und Fig. 9). To use the FS200, remove the Bike Garage from the bike in reverse order. To repack it in the integrated bag, gradually fold the sheet to the size of the bag,...
Mould formation can be avoided by only removing the Bike Garage once it is dry again. Make sure that the Bike Garage is only packed in the integrated bag when dry. Ventilate the Bike Garage...
You can find more details on the guarantee on our website: www.cagobike.com Export to the USA and Canada is not permitted (product liability)! Service If you have questions concerning this user manual, please contact your Ca Go partner/dealer or your Ca Go service team.