NETGEAR FSM726S Installation Manual page 109

Two examples of for setting up VLANs will be given. Example 1 will step through a simple two-group VLAN setup. Example 2 will step through a
more elaborate setup illustrating all possible scenarios for a comprehensive understanding of tagged VLANs.
Example 1
This example shows the basics of setting up a VLAN.
1. In the VLAN Administration page, add a new VLAN to the list, shown below as "First" with a VLAN ID value of 2.
2. In the VLAN Membership page, use the space bar to modify the matrix until the desired ports are all members of the selected VLAN as
either tagged or untagged ports.
Page 108 of 121