NETGEAR FS728TS Brochure & Specs page 2

FS728TS/
FS752TS
FS752TPS
NETGEAR ProSafe Related Products
• Accessories:
- FA311 32-bit 10/100 PCI Adapter
- FA511 PC Card 10/100 Adapter
- GA311 32-bit Gigabit PCI Adapter
- GA511 Gigabit PC Card Adapter
- NMS100 Network Management
Software
• VPN Firewalls:
- FVS124G Gigabit VPN
Firewall 25
- FVS338 VPN Firewall 50
• Wireless:
- WAG102 Dual Band Access Point
- WG102 802.11g Access Point
• Switches:
- FS726TP 24 Port 10/100 Smart Switch
w/2 Gigabit Ports and PoE
- FS726T 24 port 10/100 Smart Switch
with 2 Gigabit ports
- FS750T2 48 port 10/100 Smart Switch
with 2 Gigabit ports
- GS716T 16 port Gigabit
Smart Switch
- GS724T 24 port Gigabit
Smart Switch
- GS748T 48 port Gigabit
Smart Switch
ProSupport Maintenance Services
- PMB0331 OnCall 24x7
- PRR0331 XPressHW Support Service
4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR
E-mail: info@NETGEAR.com
www.NETGEAR.com
©2006 NETGEAR, Inc. NETGEAR, the
NETGEAR logo, Connect with Innovation,
Everybody's connecting, the Gear Guy logo,
IntelliFi, ProSafe, RangeMax and Smart
Wizard are trademarks or registered
trademarks of NETGEAR, Inc. in the United
States and/or other countries. Microsoft and
Windows are trademarks or registered
trademarks of Microsoft Corporation in the
United States and/or other countries. Other
brand and product names are trademarks
or registered trademarks of their respective
holders. Information is subject to change
without notice. All rights reserved.
* Free basic installation support provided
for 90 days from date of purchase.
Advanced product features and
configurations are not included in free
basic installation support; optional
premium support available.
D-FS728TS/FS752TS-2
ProSafe Stackable Smart Switch Family
24, 48, Gigabit, and PoE
Technical Specifications
• Network Protocol and Standards
Compatibility:
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x full-duplex flow control
- IEEE 802.3af power over Ethernet (FS752 TPS)
• Interfaces
- FS728TS: 24 10/100 Mbps auto sensing
switching ports
- FS752TS/FS752TPS: 48 10/100 Mbps auto
sensing switching ports
- FS752TPS: 24 10/100 Mbps ports with PoE
- 4 Built-in RJ-45 Gigabit Ethernet ports for
10/100/1000 Mbps connectivity
- 2 SFP slots for fiber Gigabit Ethernet modules
- Auto-sensing and auto-negotiating capabilities
for all ports
- Auto Uplink
on all ports to make the
™
right connection
• Administrative Switch Management
- IEEE 8021.Q VLAN (128 groups, Static)
- IEEE 802.1p Class of Service (CoS)
- Port-based QoS
- IEEE 802.3ad Link Aggregation (LACP)p
- IEEE 802.1D Spanning Tree Protocol
- SNMP v1, v2c, v3
- RFC 1213 MIB II
- RFC 1643 Ethernet Interface MIB
- RFC 1493 Bridge MIB
- RFC 2131 DHCP client
- IEEE 802.1x
- Port-based security by locked MAC addresses
- Storm control for broadcast, multicast and
unknown unicast packets
- Port-based ingress/egress rate limiting
- SNTP
- RMON group 1, 2, 3, 9
- Private Enterprise MIB
- Port Mirroring Support
- Web-based configuration
- Configuration Backup/Restore
- Password Access Control
- Firmware upgradeable
• Performance Specifications
- Forwarding modes: Store-and-forward
- Bandwidth: 12.8 Gbps for FS728TS, 17.6 Gbps
for FS752TS/FS752TPS
- Network latency: Less than 20 microseconds for
64-byte frames in store-and-forward mode for100
Mbps to 100 Mbps transmission
- Buffer memory: 128 KB
- Address database size: 8,000 media access control
(MAC) addresses per system
- Addressing: 48-bit MAC address
- Mean Time Between Failure (MTBF): 100,000
hours (~11 years) for FS728TS; 84,000 hours
(~9 years) for FS752TS; 80,000 (~9 years) for
FS752TPS
• LEDs
- Unit: Power, Master, Stack ID
- Per Port: Link, Speed, Activity
- Per Gigabit Port: Link, Speed, Activity, Stack
- FS752TPS: PoE Max, PoE active, PoE fault
• Power Supply
- Power Consumption: 15 W maximum
- 100-240VAC/50-60 Hz universal input
- FS752 TPS: 180 W PoE power budget
• Physical Specifications
- Dimensions (H x W x D): 1.70 x 17.32 x 10.12 in.
(43.2 x 440 x 257 mm)
- Weight: FS728TS: 5.73 / 2.6 (lbs/kg)
FS752TS: 6.57 / 2.98 (lbs/kg)
FS752TPS: 8.91 / 4.05 (lbs/kg)
• Environmental Specifications
- Operating temperature: 32 to 104° F (0 to 40° C)
- Storage temperature: -4 to 158° F (-20 to 70° C)
- Operating humidity: 90% maximum relative humidity,
non-condensing
- Storage humidity: 95% maximum relative humidity,
non-condensing
- Operating altitude: 10,000 ft (3,000 m) maximum
- Storage altitude: 10,000 ft (3,000 m) maximum
• Electromagnetic Compliance
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- EN 55022 (CISPR 22),
- EN 55024 (CISPR 24)
- C-Tick
• Safety
- CE mark, commercial
- CUL 60950 (Listed)/ EN60950
(Low Voltage Directive)
• Warranty
- NETGEAR 5-year warranty
System Requirements
- Category 5 network cables
- Network card for each PC
- Network software (e.g., Windows
Package Contents
- FS728TS/FS752TS/FS752TPS ProSafe 24/48 port Stackable
Smart Switch with 4 Gigabit Ports
- Rubber footpads
- Power cord
- Rack-mount kit
- Resource CD Installation Guide
- Warranty/Support information card
Modules
- AGM731F ProSafe 1000BASE-SX SFP GBIC:
Module with LC connectors for 50um or 62.5um
multi-mode fiber cable
- AGM732F ProSafe 1000BASE-LX SFP GBIC:
Module with LC connectors for 9um single-mode
fiber cable
- AGM733 ProSafe 1000BASE-LZ SFP GBIC:
Module with LC connectors for 9um
single-mode fiber cable
® )